Gates 39054 belt tensioner for the 2006 Honda Civic 4-cylinder 1.8L keeps the accessory drive belt under steady tension.
- Gates DriveAlign automatic belt drive tensioner
- Patented labyrinth seal protects the internal components
- Patented vibration-damping system absorbs extreme vibration to improve the life of the tensioner, belt and accessories
- Torsional round spring design for reliability and consistent tension
- Smooth single pulley, 70 mm outside diameter, runs on the backside of the V-ribbed belt
Quick facts
- Part: Gates 39054 belt tensioner
- Also called: serpentine belt tensioner
- Fits: 2006 Honda Civic 4-cylinder 1.8L
- Material: Steel
- Condition: New
A worn belt tensioner can show up as belt squeal, a belt that slips or wears unevenly, or a rough, noisy pulley bearing. With the engine off and cool, look the belt over for cracks or fraying and the pulley for wobble or rust before deciding the tensioner is the cause. A tired belt or a noisy accessory bearing can sound much the same.
Fits
It fits the 2006 Honda Civic 4-cylinder 1.8L (L4-1.8L) and is built to rigid tolerances for OE fit, form and function.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 70 mm (2.76 in)
- Bearing bore inside diameter: 17 mm (0.67 in)
- Width: 31 mm (1.2 in)
- Mounting holes: 2
- Pulley: single, smooth, unflanged
Build and materials
- Type: automatic belt drive tensioner
- Belt type: V-ribbed
- Contact surface: smooth, backside of the belt
- Material: Steel
- Condition: New
- Country of origin: China
In the box
One belt tensioner assembly. This listing holds one, and the 2006 Honda Civic 4-cylinder 1.8L takes one.
Interchange: 231600 · 4020 · 305600 · 89600 · 49417 · 31170RNAA01 · 31170RNAA02 · 31170RNAA03 · 999182A · 999182
This part cross-references / interchanges with the following part numbers:
39054, 231600, 4020, 305600, 89600, 49417, 31170RNAA01, 31170RNAA02, 31170RNAA03, 999182A, 999182
Frequently Asked Questions
Is the Gates 39054 the right belt tensioner for the 2006 Honda Civic 4-cylinder 1.8L?
Yes. Gates 39054 fits the 2006 Honda Civic 4-cylinder 1.8L (L4-1.8L), and that car takes one tensioner.
What size is the pulley on the Gates 39054?
The pulley is 70 mm (2.76 in) in outside diameter and 31 mm (1.2 in) wide, with a 17 mm (0.67 in) bearing bore. Its smooth surface runs on the backside of the belt.
Is this serpentine belt tensioner sold as one assembly with its pulley?
Yes. Gates 39054 is one tensioner assembly with a single pulley, and the application takes one.
Is the Gates drive belt tensioner 39054 an automatic tensioner?
Yes. It is a DriveAlign automatic tensioner with a torsional round spring design that provides consistent tension.
Can Gates 39054 be used in place of part number 31170RNAA01?
Yes. 31170RNAA01 is listed as an interchange number for Gates 39054.
