Coolant Bypass Hose for 1994-1995 Ford Taurus & More - Gates 19034

$32.99

Vehicles this part fits

    Part number: 19034
    UPC: 072053297959
    Condition: New
    Weight: 0.79 LBS
    Item Package Quantity: 1
    $32.99
    Adding to cart… The item has been added

    Have questions?

    Gates Engine Coolant Bypass Hose P/N:19034
    Gates Engine Coolant Bypass Hose P/N:19034
    $32.99
    $32.99

    Gates 19034 coolant bypass hose for the 1994-1995 Ford Taurus V6 3.8L and other vehicles carries coolant between engine cooling system connections. It is a factory-molded, OEM-style hose made for today's smaller, tighter engine compartments.

    • Gates Small I.D. Molded Coolant Hose, used for coolant, water and air applications and also approved for marine applications
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C)

    Quick facts

    • Part: Gates 19034 coolant bypass hose
    • Also called: engine coolant bypass hose
    • Fits: 1994-1995 Ford Taurus V6 3.8L and other vehicles
    • Material: EPDM
    • Condition: New

    A worn engine coolant bypass hose can show up as coolant seepage, a cracked, soft or swollen hose, or repeated coolant top-ups. Before you replace it, rule out a loose clamp or a leaking fitting nearby, since those can leak in the same area. The engine takes a single hose, and this listing is one hose.

    Fits

    The 1994-1995 Ford Taurus V6 3.8L, the 1994-1995 Ford Sable V6 3.8L and the 1994-1995 Mercury Sable V6 3.8L are covered by this direct-fit hose, along with other vehicles.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Centerline length: 19.5 in (495 mm)
    • Inside diameter, end 1: 0.62 in (16 mm)
    • Inside diameter, end 2: 0.62 in (16 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use for fuel or oil transfer applications.

    Interchange: F4DE 8A582 AA · F4DE 8A582 AB · F4DZ 8A582 A
    18099L · 64117 · 11034

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18099L, 19034, F4DE 8A582 AA, F4DE 8A582 AB, F4DZ 8A582 A, 64117, 11034

    Frequently Asked Questions

    Does the Gates 19034 coolant bypass hose fit a 1994-1995 Ford Sable V6 3.8L?

    Yes, Gates 19034 fits the 1994-1995 Ford Sable V6 3.8L and the 1994-1995 Ford Taurus V6 3.8L. If your car is not named here, look it up in the "Vehicles it fits" section.

    What size is the Gates 19034 hose?

    Gates 19034 is 19.5 in (495 mm) long along its centerline, with a 0.62 in (16 mm) inside diameter at both ends.

    What is this coolant bypass hose made of, and what temperatures does it handle?

    The tube and cover are EPDM, with a synthetic fiber knit reinforcement. The temperature range is -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C).

    Can I use this molded hose for fuel or oil lines?

    No. This hose is for coolant, water and air applications, including marine, and is not for fuel or oil transfer.

    Do I need new hose clamps when installing this hose?

    Yes, put new hose clamps on whenever a new coolant hose goes in, rather than refitting the old ones.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review