Coolant Bypass Hose for 1970-1978 Dodge Charger & More - Gates 20693

$17.99

Vehicles this part fits

    Part number: 20693
    UPC: 072053052435
    Condition: New
    Weight: 0.30 LBS
    Item Package Quantity: 1
    $17.99
    Adding to cart… The item has been added

    Have questions?

    Gates Engine Coolant Bypass Hose P/N:20693
    Gates Engine Coolant Bypass Hose P/N:20693
    $17.99
    $17.99

    Gates 20693 coolant bypass hose for the 1970-1978 Dodge Charger V8 5.2L, the 1972-1973 Charger V8 5.6L, the 1974-1978 Charger V8 5.9L and other vehicles and equipment carries coolant as part of the engine cooling system. Some catalogs list the same hose as an engine coolant bypass hose.

    • Specifically engineered materials resist collapse under vacuum
    • Built to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped molded form for a tight seal at the connections
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A, except for tolerances
    • Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)

    Quick facts

    • Part: Gates 20693 coolant bypass hose
    • Also called: engine coolant bypass hose
    • Fits: the 1970-1978 Dodge Charger V8 5.2L, the 1972-1973 Charger V8 5.6L, the 1974-1978 Charger V8 5.9L and other vehicles and equipment
    • Material: EPDM
    • Condition: New

    A coolant bypass hose that is cracked, bulging or leaking at its ends can mean it is due for replacement. With the engine off and cool, look the hose over for those signs. Find the cause of any coolant loss before replacing it, since a leak can start elsewhere in the system.

    Fits

    The listing covers a wide range of Dodge, Chrysler, Fargo and Plymouth models, including the 1987-1991 Dodge Dakota V6 3.9L, the 1989 Dakota V8 5.2L, the 1978-1979 Chrysler Town & Country V8 5.9L and the 1978-1981 Town & Country V8 5.2L. This listing is one hose, and each application takes one. If your truck, van or car is not named here, look it up in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Quantity per application: 1
    • Centerline length: 6.5 in (165 mm)
    • Inside diameter, each end: 1 in (25 mm)

    Build and materials

    • Material: EPDM
    • Construction: molded, no spring
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Does the Gates 20693 coolant bypass hose fit the 1974-1978 Dodge Charger V8 5.9L?

    Yes. Gates 20693 is listed for the 1974-1978 Dodge Charger V8 5.9L. If your vehicle is a different one, look it up in the "Vehicles it fits" section.

    What are the end diameters and length of this Gates 20693 hose?

    Gates 20693 has a 1 in (25 mm) inside diameter at both ends and a centerline length of 6.5 in (165 mm).

    What is this coolant bypass hose made of, and what temperatures can it handle?

    The tube is EPDM with synthetic fiber knit reinforcement and an EPDM cover. It is rated for -40 °F to +257 °F (-40 °C to +125 °C).

    Do I need new clamps when I install this coolant bypass hose?

    Yes, plan on new clamps. The hose clamps should be replaced each time a new coolant hose is installed.

    Can I use this coolant bypass hose for fuel or oil lines?

    No. Gates 20693 is a coolant bypass hose and is not for fuel or oil transfer applications.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review