Crankcase Breather Hose for 2008-2013 Nissan Rogue & More - Gates EMH060

$43.99

Vehicles this part fits

    Part number: EMH060
    UPC: 770075854029
    Condition: New
    Weight: 0.24 LBS
    Item Package Quantity: 1
    $43.99
    Adding to cart… The item has been added

    Have questions?

    Gates Engine Crankcase Breather Hose P/N:EMH060
    Gates Engine Crankcase Breather Hose P/N:EMH060
    $43.99
    $43.99

    Route crankcase blow-by vapors where they belong with the GATES engine crankcase breather hose (EMH060), a molded emission-control and crankcase ventilation hose that carries vapors from the PCV valve to the intake. It's an OE-exact, direct-fit replacement for the 2008-2013 Nissan Rogue and the 2014 Nissan Rogue Select, both with the L4-2.5L engine, and pushes in for straightforward installation.

    • Rubber construction: resistant to fuel vapors and oil for durable service.
    • Meets SAE J30R7: rated for a temperature range of -40°F to +275°F (-40°C to +135°C).
    • Molded design: push-in end type, .39 in (10 mm) inside diameter, 7.28 in (185 mm) centerline length.
    • Protective sleeve included; PCV valve and mounting hardware are not included.

    This crankcase vent hose replaces the original PCV-valve-to-intake line when the old hose hardens, cracks, or leaks. If a deteriorated hose is the cause of a rough idle or a stored code, replacing it restores that section of the ventilation path. Country of origin: China.

    Interchange: 11823ET89D

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    11823ET89D, EMH060

    Frequently Asked Questions

    What vehicles does the GATES engine crankcase breather hose EMH060 fit?

    It's a direct-fit replacement for the 2008-2013 Nissan Rogue and the 2014 Nissan Rogue Select, both equipped with the L4-2.5L engine.

    Where does this hose connect on the engine?

    It's cataloged for the PCV valve to intake position, carrying crankcase blow-by vapors from the PCV valve to the intake as part of the ventilation system.

    Is a PCV valve or mounting hardware included?

    No. The PCV valve is not included and mounting hardware is not included. A protective sleeve is included with the hose.

    What is a crankcase vent hose and what does it do?

    It routes crankcase blow-by vapors from the PCV valve to the intake so they can be re-burned instead of building up pressure or escaping. A cracked or hardened hose is a common failure point.

    What are the key specifications of the EMH060 hose?

    It's a molded rubber hose with a .39 in (10 mm) inside diameter, 7.28 in (185 mm) centerline length, push-in ends, and meets SAE J30R7 for -40 to +275 deg F service.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review