Gates EMH098 crankcase breather hose for the 2017-2019 Ford Escape 4-cylinder 1.5L connects the valve cover to the intake tube. Also called a crankcase vent hose, it carries crankcase vapors between those two points.
- Resists fuel vapors and oil
- Meets SAE J30R7 specifications
- Rated for -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Molded hose with two quick-connect fittings
Quick facts
- Part: Gates EMH098 crankcase breather hose
- Also called: crankcase vent hose
- Fits: 2017-2019 Ford Escape 4-cylinder 1.5L
- Position: valve cover to intake tube
- Material: plastic, rubber
- Condition: New
A cracked or soft hose, oil seepage at either end or a hiss from the engine bay can mean the hose is worn. Before you replace it, rule out a loose fitting, a fault elsewhere in the crankcase ventilation system or any other source of the same signs, since those call for different repairs. The engine takes a single hose.
Fits
This OE-exact hose is a direct replacement for the 2017-2019 Ford Escape 4-cylinder 1.5L.
Specifications
Fit and size
- Position: valve cover to intake tube
- Quantity per vehicle: 1
- Inside diameter: 16 mm (0.625 in) and 23 mm (0.9 in)
- Centerline length: 737 mm (29 in)
Build and materials
- Construction: molded
- Material: plastic, rubber
- Grade type: OE Exact
- Protective sleeve: included
- Condition: New
- Country of origin: China
In the box
One crankcase breather hose with its protective sleeve. A PCV valve and mounting hardware are not included.
Installation notes
- The ends are push-in and clip-on.
- The direct-replacement design is intended for exact fit and easy installation.
Interchange: KCV-305
GV6Z 6A664 A · GV6Z 6A664 B · PCV768 · 46134 · V631
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
PCV768, EMH098, 46134, GV6Z 6A664 A, GV6Z 6A664 B, KCV-305, V631
Frequently Asked Questions
Is the Gates EMH098 crankcase breather hose right for the 2017-2019 Ford Escape 4-cylinder 1.5L?
Yes. Gates EMH098 is a direct replacement for the 2017-2019 Ford Escape 4-cylinder 1.5L and runs from the valve cover to the intake tube.
Does the Gates EMH098 hose come with a protective sleeve and a PCV valve?
Yes, it includes the protective sleeve, but no PCV valve or mounting hardware. Gates EMH098 comes as one molded hose.
What are the inside diameters of this crankcase breather hose?
The hose has 16 mm (0.625 in) and 23 mm (0.9 in) inside diameters. Its centerline length is 737 mm (29 in).
How can I tell if a crankcase breather hose is going bad?
With the engine off and cool, look for cracks, soft spots or oil seepage at either end. Any of these can mean the hose is worn.
Does the Gates EMH098 replace number GV6Z 6A664 A?
Yes. GV6Z 6A664 A is one of the other-brand and OE numbers this Gates EMH098 hose replaces; the Interchange line on the page lists the rest.
