VVT Solenoid for 2017-2020 Genesis G80 & More - Gates VVS260

$144.99

Vehicles this part fits

    Part number: VVS260
    UPC: 770075799412
    Condition: New
    Weight: 0.25 LBS
    Item Package Quantity: 1
    $144.99
    Adding to cart… The item has been added

    Have questions?

    Gates Engine Variable Valve Timing (VVT) Solenoid P/N:VVS260
    Gates Engine Variable Valve Timing (VVT) Solenoid P/N:VVS260
    $144.99
    $144.99

    Gates VVS260 VVT solenoid for the 2017-2020 Genesis G80 V8 5.0L and other vehicles continuously controls oil flow to the valve timing system. Also called a variable valve timing solenoid, it is activated electromagnetically.

    • Continuous oil flow control for precise valve timing
    • Aluminum housing
    • Female connector with two male blade terminals
    • Tested to help restore engine performance, fuel economy and idle quality

    Quick facts

    • Part: Gates VVS260 VVT solenoid
    • Also called: variable valve timing solenoid
    • Fits: 2017-2020 Genesis G80 V8 5.0L and other vehicles
    • Position: Exhaust
    • Material: Aluminum housing
    • Condition: New

    A rough idle, lower fuel economy or a check engine light can go with a failing VVT solenoid, but those signs have other sources. Before you replace this solenoid, rule out a damaged connector, a wiring fault and a low oil level, since each can set off similar symptoms.

    Fits

    It is listed for a wide range of Genesis, Hyundai and Kia models, among them the 2017-2019 Genesis G90 V8 5.0L, which takes two, and the 2015-2017 Kia K900 V8 5.0L, which takes four. It is designed to OE specifications in fit, form and performance. This listing is one exhaust solenoid. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: Exhaust
    • Quantity per vehicle: 2 or 4, depending on the car
    • Overall height: 4.25 in (108 mm)
    • Housing length: 1.71 in (43 mm)
    • Housing width: 1.18 in (30 mm)
    • Shaft diameter: 0.707 in (17.95 mm)

    Build and materials

    • Housing material: Aluminum
    • Activation type: Electromagnetic
    • Voltage: 12 V
    • Seal: included
    • Condition: New
    • Country of origin: China

    In the box

    One VVT solenoid with its seal. Mounting hardware is not included, so plan on new bolts, as the old ones may not be reusable.

    Interchange: 7V-7023 · 916-715
    VV1111 · 243553F400 · VVT211

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    VV1111, 7V-7023, 916-715, 243553F400, VVS260, VVT211

    Frequently Asked Questions

    Is the Gates VVS260 right for a 2017-2020 Genesis G80 V8 5.0L?

    Yes, Gates VVS260 is listed for the 2017-2020 Genesis G80 V8 5.0L; the 2017 model takes four and the 2018-2020 models take two. Other models are in the "Vehicles it fits" section.

    Does the Gates VVS260 come with mounting bolts?

    No. Gates VVS260 comes with its seal but without mounting hardware, so plan on new bolts.

    What voltage and connector does this exhaust VVT solenoid use?

    This solenoid runs on 12 volts. It has one female connector with two male blade terminals.

    What symptoms can a failing exhaust VVT solenoid cause?

    A rough idle, lower fuel economy or a check engine light can go with a failing solenoid, but they have other causes too. A shop can test it.

    Does the Gates VVS260 replace number 243553F400?

    Yes. 243553F400 is one of the numbers this solenoid replaces, along with 7V-7023 and 916-715.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review