Gates 41080 water pump for the 2000-2012 Chevrolet Chevy 4-cylinder 1.6L and other vehicles circulates coolant through the engine. This engine water pump is a new part.
- 100 percent functional test of the seals and bearings
- 100 percent leakage test of the casting and the fully assembled water pump
- Cast aluminum housing with a cast iron impeller
- Timing belt driven pump with standard impeller rotation
Quick facts
- Part: Gates 41080 water pump
- Also called: engine water pump
- Fits: 2000-2012 Chevrolet Chevy 4-cylinder 1.6L and other vehicles
- Material: Cast aluminum housing, cast iron impeller
- Condition: New
A worn water pump can show up as coolant stains near the pump, a rising temperature gauge or a whining or grinding noise from the pump area. With the engine off and cool, look around the pump for wet or crusty coolant traces. These signs can also come from a hose, the thermostat or the radiator, so find the cause before replacing the pump.
Fits
It fits and performs to OE specifications and requirements, and is listed for a wide range of Chevrolet and Pontiac models, including the 2003 Chevrolet Chevy Monza 4-cylinder 1.6L and the 2000-2003 Chevrolet Chevy Pickup 4-cylinder 1.6L. If your car is not named here, check its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Pulley: included
Build and materials
- Housing material: cast aluminum
- Impeller material: cast iron
- Condition: New
- Warranty: Gates limited lifetime warranty
- Country of origin: China
In the box
One water pump and one seal; each vehicle takes one pump. The back housing, the thermostat housing and the fan clutch are not included.
Frequently Asked Questions
Is the Gates 41080 the right Chevy pump for the 2000-2012 Chevrolet Chevy 4-cylinder 1.6L?
Yes. The Gates 41080 is listed for the 2000-2012 Chevrolet Chevy 4-cylinder 1.6L, and each vehicle takes one pump.
Does the Gates 41080 come with a pulley, and is the thermostat housing included?
The Gates 41080 includes its pulley and a seal. The back housing, the thermostat housing and the fan clutch are not included.
What are the housing and impeller of this water pump made of?
The housing is cast aluminum and the impeller is cast iron.
Is this water pump driven by the timing belt?
Yes. This water pump is timing belt driven and has standard impeller rotation.
What tests does each of these Gates water pumps go through?
The seals and bearings get a 100 percent functional test. The casting and the fully assembled water pump get a 100 percent leakage test.
