Gates 42032 cooling system components for the 1966-1978 Dodge Charger 5.9L / 6.3L / 6.6L / 7.0L / 7.2L and other vehicles supply a new engine water pump that circulates coolant through the engine and is driven by the accessory belt.
- 100 percent functional test of the seals and bearings
- 100 percent leakage test of the casting and of the fully assembled water pump
- Fits and performs to OE specifications and requirements
- Designed to improve on the performance of the equivalent standard pump
Coolant seepage around the pump, a whine or grinding from the pump bearing, or an engine that runs hot can mean the pump is worn. Hoses, the thermostat and the radiator can also be behind overheating or coolant loss, so find out which part is at fault before you buy.
The pump is listed for a wide range of Chrysler, DeSoto, Dodge, Fargo and Plymouth models, including the 1959-1971 Chrysler 300 6.3L / 6.7L / 6.8L / 7.0L / 7.2L and the 1958-1978 Plymouth Fury 5.7L / 5.9L / 6.3L / 6.6L / 6.7L / 7.0L / 7.2L, and either one takes a single pump. To check your own model and engine, open the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Drive type: accessory belt (not timing belt driven)
- Impeller rotation: standard
Build and materials
- Housing material: stamped steel
- Impeller material: stamped steel
- Condition: new
- Warranty: Gates limited lifetime warranty
- Country of origin: China
In the box
Water pump and gasket. The pulley, fan clutch, back housing, and thermostat and housing are not included.
Frequently Asked Questions
Does the Gates 42032 water pump fit the 1966-1978 Dodge Charger 5.9L / 6.3L / 6.6L / 7.0L / 7.2L?
Yes, Gates 42032 is listed for the 1966-1978 Dodge Charger 5.9L / 6.3L / 6.6L / 7.0L / 7.2L. For another model or engine, open the "Vehicles it fits" section.
Does the Gates 42032 come with a gasket, and is the pulley included?
Yes, Gates 42032 includes a gasket with the water pump. The pulley, fan clutch, back housing, and thermostat and housing are not included.
Is this water pump driven by the accessory belt or the timing belt?
This water pump is driven by the accessory belt, not the timing belt. Its impeller rotation is standard.
How can I tell if my belt-driven water pump is leaking or wearing out?
With the engine off and cool, look for coolant seepage around the pump. A whine or grinding from the pump bearing, or an engine that runs hot, can also mean it is worn.
How is this Gates water pump tested, and what warranty comes with it?
Every pump gets a 100 percent functional test of the seals and bearings and a 100 percent leakage test of the casting and the assembled pump. It is backed by a Gates limited lifetime warranty.
