Gates HVAC Heater Control Valve P/N:EHV148
Gates EHV147 heater control valve for the 1995-2002 Mercedes-Benz SL500 and other vehicles adjusts coolant flow through the heater core to control the cabin temperature setting. This Gates heater control valve is electrically operated, and some catalogs list it as an HVAC heater control valve.
A failing valve can show up as cabin air that stays too hot or too cold, or as coolant seeping around the valve body. Other heater and cooling faults produce similar symptoms, so with the engine off and cool, look over the valve, its outlets and the hose connections for cracks or coolant residue before deciding the valve is the cause.
This heater control valve is an application-specific, OE-exact replacement for the 1995-2002 Mercedes-Benz SL500, the 1994-1997 Mercedes-Benz SL320 and the 1990-1993 Mercedes-Benz 300SL. 3D model imaging in the design phase supports a precise fit. If you drive a different Mercedes-Benz, look it up in the "Vehicles it fits" section on this page.
Fit and size
Build and materials
One heater control valve and two isolation mounts. The listing is a single valve, and a car takes one.
Interchange: 0008307284
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates EHV147 fit the 1994-1997 Mercedes-Benz SL320?
Yes. Gates EHV147 is listed for the 1994-1997 Mercedes-Benz SL320, and it also fits the 1995-2002 Mercedes-Benz SL500.
Does the EHV147 come with isolation mounts?
Yes. The Gates EHV147 listing contains one electric coolant valve and two isolation mounts.
What size are the ports on this heater control valve?
The inlet port and the outlet port each measure 18 mm (0.71 in) in outside diameter on this Gates EHV147.
Could a heater that blows too hot or too cold come from this heater control valve?
Yes, it can. A stuck or leaking valve may leave cabin air at the wrong temperature or leave coolant residue on the body, and a shop can test the electric actuator.
What are the outlets on this valve made of?
The outlets are plastic made of 100 percent virgin resins. The metal components are steel, used as needed to resist corrosion.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.