Gates HVAC Heater Hose P/N:12562
Gates 12165 heater hose for the 2015-2019 Hyundai Sonata 4-cylinder 1.6L carries hot engine coolant to the heater core. This Gates molded heater hose is sold individually and installs in the heater inlet position.
Coolant drips, a coolant smell, a soft or swollen hose or cracks in the cover can mean this hose is worn, though a leaking heater core or a loose hose clamp can be behind them, so find the cause before replacing the hose.
It is a direct-fit replacement for the 2015-2019 Hyundai Sonata 4-cylinder 1.6L, which takes one.
Fit and size
Build and materials
Interchange: 16707M · F10524 · 97311C2000 · 13165
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does Gates 12165 fit the 2015-2019 Hyundai Sonata 4-cylinder 1.6L?
Yes. Gates 12165 is a heater inlet hose listed for the 2015-2019 Hyundai Sonata 4-cylinder 1.6L, and that car takes one.
What temperature range does this HVAC heater hose handle?
Gates 12165 handles -40 °F to 275 °F (-40 °C to 135 °C). Its tube and cover are EPDM over a synthetic fiber knit reinforcement.
Can the Gates heater hose be used for fuel or oil lines?
No. This hose is for coolant, water and air applications, and it is also approved for marine use. It must not be used for fuel or oil transfer.
Should I replace the hose clamps when I install this heater hose?
Yes. New hose clamps are recommended each time a new coolant hose is installed, so plan on fresh clamps for this hose.
What are the length and inner diameter of Gates 12165?
The centerline length is 15.81 in (402 mm). Both ends have a 0.73 in (19 mm) inside diameter.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.