Gates HVAC Heater Hose P/N:19240
Gates 12238 heater hose for the 2014-2019 Kia Soul carries hot engine coolant on the heater inlet side to the heater core that warms the cabin.
Cracks, coolant drips or weak cabin heat can mean this heater hose is worn, though a leaking heater core or a stuck thermostat can be behind them too, so find the real cause before you replace it.
This Gates molded heater hose is a direct-fit replacement for the 2014-2019 Kia Soul.
Interchange: 14931S · F10545 · 97311B2200 · 13238
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 12238 heater hose fit a 2014-2019 Kia Soul?
Yes. The Gates 12238 heater hose fits the 2014-2019 Kia Soul as a direct-fit replacement in the heater inlet position.
Is the Gates HVAC heater hose approved for marine use?
Yes. This molded heater hose is approved for marine applications and can carry coolant, water or air, but it is not for fuel or oil transfer.
What temperature range is this EPDM heater hose rated for?
This heater hose is rated from -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C) and meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
How can I tell if my heater inlet hose is going bad?
With the engine off and cool, look for a heater hose that is cracked, swollen or leaking coolant, since any of these can mean this heater inlet hose is worn.
Can I reuse my old clamps when installing the Gates 12238 hose?
No. New hose clamps should go on every time a new coolant hose such as the Gates 12238 is put in.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.