Gates HVAC Heater Hose P/N:19537
Gates 12265 heater hose for the 2010-2018 Lexus GX460 V8 4.6L carries engine coolant between two pipes in the heating circuit. This HVAC heater hose is factory-molded to fit smaller, tighter engine compartments.
A coolant leak, a soft or swollen hose, cracks in the cover, a sweet coolant smell or a heater that blows cool air can mean the hose is wearing out. These signs alone do not prove the hose is at fault, since a leaking heater core can produce a similar picture.
It fits the 2010-2018 Lexus GX460 V8 4.6L, which takes one. This listing is one hose.
Fit and size
Build and materials
Interchange: 13265 · 8724535A40
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 12265 heater hose fit the 2010-2018 Lexus GX460 V8 4.6L?
Yes. Gates 12265 is listed for the 2010-2018 Lexus GX460 V8 4.6L, which takes one hose, positioned pipe to pipe (inlet).
Is this Gates molded heater hose approved for marine use?
Yes. Gates 12265 can be used for coolant, water and air applications, and it is also approved for marine applications.
What is the inside diameter of this heater hose?
Both ends measure 16 mm (0.62 in) inside, and the centerline length is 447 mm (17.58 in).
Can this heater hose be used on a fuel or oil line?
No. It is not for fuel or oil transfer; it is made for coolant, water and air applications.
Should I reuse the old hose clamps with this hose?
No. Replace the hose clamps whenever a new coolant hose goes on.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.