Heater Hose for 1987-1990 Jeep Cherokee & More - Gates 18051

$19.99

Vehicles this part fits

    Part number: 18051
    UPC: 072053178319
    Condition: New
    Weight: 0.21 LBS
    Item Package Quantity: 1
    $19.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18051
    Gates HVAC Heater Hose P/N:18051
    $19.99
    $19.99

    Gates 18051 heater hose for the 1987-1990 Jeep Cherokee 6-cylinder 4.0L and other vehicles carries engine coolant through the heater circuit. Shoppers also know this Gates molded heater hose as an HVAC heater hose.

    • Factory-molded shape for today's smaller, tighter engine compartments
    • Used for coolant, water and air applications, and also approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications

    Quick facts

    • Part: Gates 18051 heater hose
    • Also called: HVAC heater hose
    • Fits: 1987-1990 Jeep Cherokee 6-cylinder 4.0L and other vehicles
    • Position: TEE-1 TO PIPE-1, PIPE-2 TO TEE-2, TEE-2 TO PIPE-2, TEE-2 TO PIPE-3, TEE-1 TO AUXILIARY PIPE-1, TEE-1 TO VALVE, VALVE TO RESERVOIR
    • Material: EPDM
    • Condition: New

    Coolant seepage at the hose ends, a cracked hose or a coolant smell can mean the hose needs replacing. A leaking clamp can also leave damp spots, so these signs alone do not prove the hose is the problem.

    Fits

    This molded heater hose is a direct-fit part for the 1987-1990 Jeep Cherokee 6-cylinder 4.0L, the 1995 Dodge B2500 V8 5.9L and the 1995-1996 B2500 V6 3.9L or V8 5.2L, the 1995-1996 Dodge B1500 V6 3.9L or V8 5.2L, and other Dodge and Jeep models. If your car is not named here, open the "Vehicles it fits" section and match your exact model and engine.

    Specifications

    Fit and size

    • Position: TEE-1 TO PIPE-1, PIPE-2 TO TEE-2, TEE-2 TO PIPE-2, TEE-2 TO PIPE-3, TEE-1 TO AUXILIARY PIPE-1, TEE-1 TO VALVE, VALVE TO RESERVOIR
    • Quantity per vehicle: 1
    • Centerline length: 12 in (305 mm)
    • End 1 inside diameter: 0.5 in (13 mm)
    • End 2 inside diameter: 0.62 in (16 mm)

    Build and materials

    • Type: molded
    • Material: EPDM
    • Construction: EPDM tube, synthetic fiber knit reinforcement, EPDM cover
    • Specification: SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range: -40 °F to 275 °F (-40 °C to 135 °C)
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose. This listing is a single hose, and the vehicles in the fitment take one.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 16003M · 4361050 · 52003881 · 55035842 · 87301 · D87301 · 63145 · 10051

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16003M, 18051, 4361050, 52003881, 55035842, 87301, D87301, 63145, 10051

    Frequently Asked Questions

    Is this Jeep Cherokee heater hose right for the 1987-1990 model with the 6-cylinder 4.0L?

    Yes. Gates 18051 is listed for the 1987-1990 Jeep Cherokee 6-cylinder 4.0L, with a quantity of one per vehicle.

    What size is the Gates 1/2 heater hose 18051?

    Gates 18051 has a 0.5 in (13 mm) inside diameter at end 1 and 0.62 in (16 mm) at end 2, with a 12 in (305 mm) centerline length.

    Can this molded heater hose carry fuel or oil?

    No. This hose is not for fuel or oil transfer. It is made for coolant, water and air applications and is also approved for marine use.

    Should I reuse the old hose clamps when I fit this heater hose?

    No. Replace the hose clamps each time a new coolant hose is installed.

    What does a worn EPDM heater hose look like?

    With the engine off and cool, look for cracks, swelling or coolant seepage along the hose and at its ends. Any of these can mean the hose is due for replacement.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review