Heater Hose for 2003-2007 Hummer H2 & More - Gates 18130

$35.99

Vehicles this part fits

    Part number: 18130
    UPC: 072053825817
    Condition: New
    Weight: 1.40 LBS
    Item Package Quantity: 1
    $35.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18130
    Gates HVAC Heater Hose P/N:18130
    $35.99
    $35.99

    Gates 18130 heater hose for the 2003-2007 Hummer H2 V8 6.0L and other vehicles carries coolant on the radiator-to-reservoir and radiator-to-throttle-body runs. This Gates molded heater hose, also called an HVAC heater hose, is made for small-I.D. coolant runs.

    • Factory-molded shape for today's smaller, tighter engine compartments
    • Can be used for coolant, water and air applications, and is approved for marine use
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40°F to 275°F (-40°C to 135°C)

    Quick facts

    • Part: Gates 18130 heater hose
    • Also called: HVAC heater hose
    • Fits: 2003-2007 Hummer H2 V8 6.0L and other vehicles
    • Position: Radiator to reservoir, radiator to throttle body
    • Material: EPDM
    • Condition: New

    Coolant seepage, cracks or a swollen hose can mean a heater hose is worn. Hose clamps, the radiator or the reservoir can also be behind coolant seepage or a swollen hose, so find the cause before you buy a replacement.

    Fits

    It fits the 2003-2007 Hummer H2 V8 6.0L, the 2004-2006 Chevrolet Epica 6-cylinder 2.5L and the 2004-2006 Suzuki Verona 6-cylinder 2.5L, with one hose per vehicle.

    Specifications

    Fit and size

    • Position: radiator to reservoir, radiator to throttle body
    • Quantity per vehicle: 1
    • Centerline length: 31 in (787 mm)
    • End 1 inside diameter: 0.25 in (6 mm)
    • End 2 inside diameter: 0.31 in (8 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range: -40°F to 275°F (-40°C to 135°C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer applications.

    Interchange: 18312L · 15057995 · 96328687 · 19130004 · 10130 · 1785786Z00 · 96343131

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18312L, 18130, 15057995, 96328687, 19130004, 10130, 1785786Z00, 96343131

    Frequently Asked Questions

    Can I use this as a heater hose for the 2003-2007 Hummer H2 V8 6.0L?

    Yes. Gates 18130 fits the 2003-2007 Hummer H2 V8 6.0L, and that engine takes one hose.

    What are the inside diameters of this Gates heater hose?

    Gates 18130 measures 6 mm (0.25 in) inside diameter at end 1 and 8 mm (0.31 in) at end 2, with a centerline length of 31 in (787 mm).

    Can I use this molded hose for fuel or oil lines?

    No, do not use it for fuel or oil transfer; it is for coolant, water and air applications and is approved for marine use.

    How can I tell if a heater hose is worn out?

    With the engine off and cool, look for cracks, swelling or coolant seepage along the hose and at the clamps. A shop can test the cooling system.

    Should I replace the hose clamps when installing this hose?

    Yes. Replace the hose clamps each time a new coolant hose is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review