Heater Hose for 2003-2005 Honda Pilot & More - Gates 18132

$6.99

Vehicles this part fits

    Part number: 18132
    UPC: 072053582444
    Condition: New
    Weight: 0.06 LBS
    Item Package Quantity: 1
    $6.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18132
    Gates HVAC Heater Hose P/N:18132
    $6.99
    $6.99

    Gates 18132 heater hose for the 2003-2005 Honda Pilot V6 3.5L and other vehicles carries engine coolant from the throttle body. This Gates molded heater hose is a factory-molded, OEM-style hose made for today's smaller, tighter engine compartments.

    • Part of the Gates Small I.D. Molded Coolant Hose line
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C)
    • Used for coolant, water and air applications and approved for marine applications

    Quick facts

    • Part: Gates 18132 heater hose
    • Also called: HVAC heater hose
    • Fits: 2003-2005 Honda Pilot V6 3.5L and other vehicles
    • Position: Throttle body to pipe-1, throttle body to thermostat
    • Material: EPDM
    • Condition: New

    A coolant leak, cracked rubber or a soft, swollen section can mean this HVAC heater hose is worn, though a loose clamp or a leaking thermostat housing can also be behind a leak, so find the cause before replacing the hose.

    Fits

    This heater hose fits the 2003-2005 Honda Pilot V6 3.5L, the 2013-2016 Nissan NV2500 V8 5.6L and the 2013-2016 Nissan NV3500 V8 5.6L, and each takes one. For any other vehicle, look up your year, model and engine in the "Vehicles it fits" section on this page.

    Specifications

    Fit and size

    • Position: Throttle body to pipe-1, throttle body to thermostat
    • Quantity per vehicle: 1
    • Centerline length: 8 in (203 mm)
    • End 1 inside diameter: 0.25 in (6 mm)
    • End 2 inside diameter: 0.25 in (6 mm)

    Build and materials

    • Material: EPDM
    • Construction: Molded
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new heater hose is installed.
    • Do not use this hose for fuel or oil transfer applications.

    Interchange: 14412S · 64373 · A91036 · 140567S005 · 19522PGKA00 · 10132

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14412S, 18132, 64373, A91036, 140567S005, 19522PGKA00, 10132

    Frequently Asked Questions

    Does the Gates 18132 heater hose fit the 2003-2005 Honda Pilot V6 3.5L?

    Yes. Gates 18132 fits the 2003-2005 Honda Pilot V6 3.5L, and the Pilot takes one hose. For other years, models or engines, look in the "Vehicles it fits" section.

    Is this Gates heater hose approved for marine use?

    Yes. Gates 18132 can be used for coolant, water and air applications and is also approved for marine applications. It is not for fuel or oil transfer.

    What inside diameter and length does this heater hose have?

    Both ends have a 0.25 in (6 mm) inside diameter, and the centerline length is 8 in (203 mm). The tube and cover are EPDM with synthetic fiber knit reinforcement.

    Does this heater hose meet SAE 20R3 specifications?

    Yes. It meets SAE 20R3 Type EC Class D-1 and D-2, with a temperature range of -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C).

    Can I reuse the old hose clamps on a new heater hose?

    No. Replace the hose clamps each time a new heater hose is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review