Gates HVAC Heater Hose P/N:51707
Gates 18350 heater hose for the 2011-2013 Toyota Highlander 4-cylinder 2.7L carries engine coolant in the heater circuit. This Gates molded heater hose is a factory-molded, OEM-style hose made for smaller, tighter engine compartments.
Coolant leaks, a cracked or swollen hose, or a heater that blows cool air can mean this hose is worn, though a loose clamp or a weak thermostat can also be behind them.
This heater hose is a direct-fit replacement for the 2011-2013 Toyota Highlander 4-cylinder 2.7L, which takes one hose in the heater to tee-2 position.
Fit and size
Build and materials
Interchange: 16562M · F10737 · 10350 · 872450E130
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 18350 heater hose fit the 2011-2013 Toyota Highlander 4-cylinder 2.7L?
Yes. Gates 18350 is listed for the 2011-2013 Toyota Highlander 4-cylinder 2.7L in the heater to tee-2 position, and that vehicle takes one hose.
Is this HVAC heater hose a molded hose?
Yes. Gates 18350 is a molded hose with an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover.
How long is this heater hose and what is its inside diameter?
This hose measures 22.8 in (579 mm) along its centerline. Its inside diameter is 0.63 in (16 mm) at both ends.
Can this heater hose be used for fuel or oil?
No. It is not for fuel or oil transfer. It is made for coolant, water and air applications and is also approved for marine applications.
Do I need new clamps when I install this heater hose?
Yes. Plan on new clamps, since hose clamps should be replaced whenever a new coolant hose goes on.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.