Heater Hose for 2010-2012 Ford Fusion & More - Gates 18530

$66.99

Vehicles this part fits

    Part number: 18530
    UPC: 770075555216
    Condition: New
    Weight: 5.26 LBS
    Item Package Quantity: 1
    $66.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18530
    Gates HVAC Heater Hose P/N:18530
    $66.99
    $66.99

    Gates 18530 heater hose for the 2010-2012 Ford Fusion 4-cylinder 2.5L and other vehicles carries engine coolant to the heater. This Gates molded heater hose suits coolant, water and air applications and is approved for marine use, not for fuel or oil transfer.

    • ThermalPro Premium molded heater hose line from Gates
    • Factory-molded shape for today's smaller, tighter engine compartments
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40°F to 275°F (-40°C to 135°C)

    Quick facts

    • Part: Gates 18530 heater hose
    • Also called: HVAC heater hose
    • Fits: 2010-2012 Ford Fusion 4-cylinder 2.5L and other vehicles
    • Position: Heater inlet
    • Material: EPDM
    • Condition: New

    Coolant seepage, a cracked, soft or swollen hose, or weak cabin heat can mean this hose is worn, though a thermostat or a heater core can also be behind weak heat. Check a hose only with the engine off and cool.

    Fits

    This hose fits the 2010-2012 Ford Fusion 4-cylinder 2.5L, the 2011-2012 Lincoln MKZ 4-cylinder 2.5L and the 2010-2011 Mercury Milan 4-cylinder 2.5L. This listing is one hose for the heater inlet; the cars above need one at that position.

    Specifications

    Fit and size

    • Position: heater inlet
    • Quantity per vehicle: 1
    • Centerline length: 30.4 in (772 mm)
    • End 1 inside diameter: 0.63 in (16 mm)
    • End 2 inside diameter: 0.75 in (19 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: new
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.

    Interchange: 9E5Z 18472 H
    18452L · 87953 · F10764 · 10530

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18452L, 18530, 87953, F10764, 9E5Z 18472 H, 10530

    Frequently Asked Questions

    Is Gates 18530 a 2010 Ford Fusion heater hose for the 4-cylinder 2.5L, and does it cover 2011-2012?

    Yes. Gates 18530 fits the 2010-2012 Ford Fusion 4-cylinder 2.5L at the heater inlet, so it covers 2010 through 2012.

    Is this a Gates 3/4 heater hose?

    Yes, at one end: the inside diameter is 0.75 in (19 mm) there and 0.63 in (16 mm) at the other end. The centerline length is 30.4 in (772 mm).

    Is this HVAC heater hose molded or straight?

    It is molded. Gates 18530 is factory-molded with an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover.

    What does a worn heater hose look like when I inspect it?

    With the engine off and cool, look for cracks, a soft or swollen hose, or coolant stains near the ends. A shop can pressure-test what you can't see.

    Do I need new clamps with the Gates 18530 heater hose?

    Yes. New hose clamps go on with every new coolant hose, and that includes the Gates 18530 heater hose.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review