Heater Hose for 2005-2010 Kia Sportage & More - Gates 18581

$26.99

Vehicles this part fits

    Part number: 18581
    UPC: 770075565239
    Condition: New
    Weight: 0.69 LBS
    Item Package Quantity: 1
    $26.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18581
    Gates HVAC Heater Hose P/N:18581
    $26.99
    $26.99

    Gates 18581 heater hose for the 2005-2010 Kia Sportage V6 2.7L and other vehicles carries hot engine coolant to the cabin heater. This Gates molded heater hose, also called an HVAC heater hose, serves the heater inlet position.

    • Gates Small I.D. Molded Coolant Hose line, factory-molded for today's smaller, tighter engine compartments
    • Suited to coolant, water and air applications, and approved for marine use
    • Built to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range of -40°F to 275°F (-40°C to 135°C)

    Quick facts

    • Part: Gates 18581 heater hose
    • Also called: HVAC heater hose
    • Fits: 2005-2010 Kia Sportage V6 2.7L and other vehicles
    • Position: Heater inlet
    • Material: EPDM, plastic
    • Condition: New

    A worn heater hose can show coolant drips at the hose or its ends, cracks, or a swollen, soft section. Before replacing it, look over the hose and its ends with the engine off and cool to find where the problem is. A shop can pressure-test the cooling system.

    Fits

    This hose is a direct-fit replacement for the 2005-2010 Kia Sportage V6 2.7L and the 2005-2006 Hyundai Tucson V6 2.7L.

    Specifications

    Fit and size

    • Position: Heater inlet
    • Quantity per vehicle: 1
    • Centerline length: 13.79 in (350 mm)
    • Inside diameter, both ends: 0.63 in (16 mm)

    Build and materials

    • Construction: Molded
    • Material: EPDM, plastic
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose. The heater inlet position takes one per vehicle, which matches what this listing holds.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 14716S · F10776 · 973112E700 · 10581

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14716S, 18581, F10776, 973112E700, 10581

    Frequently Asked Questions

    Does the Gates 18581 heater hose fit the 2005-2006 Hyundai Tucson V6 2.7L?

    Yes. Gates 18581 fits the 2005-2006 Hyundai Tucson V6 2.7L, as well as the 2005-2010 Kia Sportage V6 2.7L, and each takes one hose.

    What size is this Gates heater hose?

    Gates 18581 measures 13.79 in (350 mm) along the centerline, with a 0.63 in (16 mm) inside diameter at both ends.

    Can this heater hose be used for fuel or oil lines?

    No. Gates 18581 is not for fuel or oil transfer; it suits coolant, water and air applications and is also approved for marine use.

    What signs can show this EPDM heater hose needs replacing?

    Wet spots near the hose ends, surface cracks or a bulging section can mean this hose needs replacing. A shop can pressure-test the cooling system if the cause is unclear.

    Is 973112E700 the same part as the Gates 18581 heater hose?

    Yes. 973112E700 is listed as an interchange number for Gates 18581, along with 14716S, F10776 and 10581.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review