Heater Hose for 2009 Kia Optima - Gates 18628

$14.99

Vehicles this part fits

    Part number: 18628
    UPC: 770075545231
    Condition: New
    Weight: 0.10 LBS
    Item Package Quantity: 1
    $14.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18628
    Gates HVAC Heater Hose P/N:18628
    $14.99
    $14.99

    Gates 18628 heater hose for the 2009 Kia Optima 4-cylinder 2.4L carries engine coolant through the heater circuit. This listing is one Gates molded heater hose for the throttle body inlet, and the engine takes one.

    • Factory-molded shape made for today's smaller, tighter engine compartments
    • EPDM tube and cover with synthetic fiber knit reinforcement
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40°F to 275°F (-40°C to 135°C)
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Part of the Gates Small I.D. Molded Coolant Hose line, used for coolant, water and air and also approved for marine use

    Quick facts

    • Part: Gates 18628 heater hose
    • Also called: HVAC heater hose
    • Fits: 2009 Kia Optima 4-cylinder 2.4L
    • Position: Throttle body inlet
    • Material: EPDM
    • Condition: New

    A coolant smell, drips under the car or a hose that looks cracked, swollen or soft can mean the hose is wearing out. With the engine off and cool, look over the hose and both ends for cracks, bulges and wet or crusty spots first, because a leak at a clamp or another connection can look much the same.

    Fits

    This is a direct-fit, OEM-style replacement for the 2009 Kia Optima 4-cylinder 2.4L.

    Specifications

    Fit and size

    • Position: Throttle body inlet
    • Quantity per vehicle: 1
    • Centerline length: 188 mm (7.4 in)
    • End 1 inside diameter: 8 mm (0.30 in)
    • End 2 inside diameter: 8 mm (0.33 in)

    Build and materials

    • Material: EPDM
    • Construction: molded
    • Use: coolant, water and air; not for fuel or oil transfer
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.

    Interchange: 14759S · F10784 · 254682G200 · 10628

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14759S, 18628, F10784, 254682G200, 10628

    Frequently Asked Questions

    Is this Gates heater hose the right one for the 2009 Kia Optima 4-cylinder 2.4L?

    Yes. Gates 18628 is a direct-fit heater hose for the 2009 Kia Optima 4-cylinder 2.4L, and it goes at the throttle body inlet.

    What temperature range does this HVAC heater hose handle?

    Gates 18628 has a temperature range of -40°F to 275°F (-40°C to 135°C). It has an EPDM tube and cover and meets SAE 20R3 Type EC Class D-1 and D-2.

    Can this hose be used for fuel or oil lines?

    No. It is not for fuel or oil transfer. It is intended for coolant, water and air applications, and it is also approved for marine use.

    Do I need new clamps when I install this heater hose?

    Yes. New clamps should go on each time a new coolant hose is installed, so plan on replacing the old ones.

    What are the inside diameter and length of this heater hose?

    Both ends measure 8 mm inside diameter, and the centerline length is 188 mm (7.4 in).

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review