Heater Hose for 1995-1999 Nissan Sentra & More - Gates 19188

$38.99

Vehicles this part fits

    Part number: 19188
    UPC: 072053516067
    Condition: New
    Weight: 0.36 LBS
    Item Package Quantity: 1
    $38.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19188
    Gates HVAC Heater Hose P/N:19188
    $38.99
    $38.99

    Gates 19188 heater hose for the 1995-1999 Nissan Sentra 4-cylinder 1.6L and other vehicles carries engine coolant along the heater-to-pipe run. This Gates molded heater hose is built in OEM style and has the quality features of Gates molded coolant hose.

    • Gates Small I.D. molded coolant hose line, factory-molded for smaller, tighter engine compartments
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Temperature range of -40°F to 275°F (-40°C to 135°C)
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Used for coolant, water and air applications, and approved for marine applications

    Quick facts

    • Part: Gates 19188 heater hose
    • Also called: HVAC heater hose
    • Fits: 1995-1999 Nissan Sentra 4-cylinder 1.6L and other vehicles
    • Position: Heater to pipe-1
    • Material: EPDM
    • Condition: New

    Signs of a worn HVAC heater hose can include cracks, swelling, soft spots or coolant seepage at the hose when the engine is cool. These signs alone do not prove the hose is the problem; a loose or worn clamp can leak coolant too.

    Fits

    The 1995-1999 Nissan Sentra, 1995-1996 Nissan Tsubame and 1998-1999 Nissan Lucino, each with the 4-cylinder 1.6L, take this hose and need one apiece, and it fits other vehicles too.

    Specifications

    Fit and size

    • Position: heater to pipe-1
    • Quantity per vehicle: 1
    • Centerline length: 12.7 in (322 mm)
    • End 1 inside diameter: 0.63 in (16 mm)
    • End 2 inside diameter: 0.75 in (19 mm)

    Build and materials

    • Material: EPDM
    • Construction: molded, with synthetic fiber knit reinforcement
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range: -40°F to 275°F (-40°C to 135°C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer.

    Interchange: 14247S · 924101M200 · 924108B700 · F10828 · 11188

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14247S, 19188, 924101M200, 924108B700, F10828, 11188

    Frequently Asked Questions

    Is this the right heater hose for the 1995-1999 Nissan Sentra 4-cylinder 1.6L?

    Yes. Gates 19188 fits the 1995-1999 Nissan Sentra 4-cylinder 1.6L. If your car is another Nissan, look it up in the "Vehicles it fits" section.

    Is this Gates 3/4 heater hose 3/4 inch on both ends?

    No. Gates 19188 measures 0.63 in (16 mm) inside diameter on End 1 and 0.75 in (19 mm) on End 2, with a centerline length of 12.7 in (322 mm).

    What is this molded heater hose made of, and what temperatures can it handle?

    The tube and cover are EPDM with synthetic fiber knit reinforcement. The temperature range is -40°F to 275°F (-40°C to 135°C).

    Do I need new clamps with this heater hose?

    Yes. Replace the hose clamps each time a new coolant hose is installed, so plan on new clamps with this Gates 19188 hose.

    Does Gates 19188 replace part number 924101M200?

    Yes. 924101M200 is one of the numbers Gates 19188 replaces; the others are on the Interchange line.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review