Gates 19198 heater hose for the 2005-2010 Cadillac STS V8 4.6L and other vehicles carries engine coolant through the heater circuit. This Gates molded heater hose is factory-molded to fit smaller, tighter engine compartments.
- EPDM tube and EPDM cover with synthetic fiber knit reinforcement
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Used for coolant, water and air applications, and approved for marine applications
Quick facts
- Part: Gates 19198 heater hose
- Also called: HVAC heater hose
- Fits: 2005-2010 Cadillac STS V8 4.6L and other vehicles
- Material: EPDM
- Condition: New
A hose that is cracked, swollen, soft or damp at the ends can point to wear, though a leak can also start at a clamp or another cooling part. With the engine off and cool, look along the hose and press it by hand for these signs before replacing it. This listing is one hose, and the 2005-2010 Cadillac STS V8 4.6L takes one.
Fits
It is listed for a wide range of Cadillac, Chevrolet and GMC models, including the 2004-2009 Cadillac SRX V8 4.6L and the 1996-2005 Chevrolet Astro V6 4.3L. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Centerline length: 34.4 in (874 mm)
- Inside diameter, both ends: 0.63 in (16 mm)
- Branch quantity: 0
- Quick connect fitting quantity: 0
Build and materials
- Material: EPDM
- Construction: molded
- Condition: New
- Country of origin: United States
In the box
One heater hose.
Installation notes
- Replace the hose clamps each time a new coolant hose is installed.
- Not for fuel or oil transfer applications.
Interchange: 18189L · 87979 · F10053 · 15730162 · 88956889 · 88957399 · 64181 · 11198
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Will the Gates 19198 heater hose fit a 1996-2005 Chevrolet Astro V6 4.3L?
Yes, Gates 19198 is listed for the 1996-2005 Chevrolet Astro V6 4.3L, which takes one hose. Open the "Vehicles it fits" section to check other models and engines.
What inside diameter and length does this heater hose have?
Gates 19198 has a 0.63 in (16 mm) inside diameter at both ends and a centerline length of 34.4 in (874 mm).
Can I use this Gates heater hose for fuel or oil lines?
No. This heater hose is made for coolant, water and air applications and must not be used for fuel or oil transfer.
What temperature range does this HVAC heater hose handle?
The EPDM hose is rated from -40 °F to 275 °F (-40 °C to 135 °C) and meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
Do I need new hose clamps with this heater hose?
Yes, the hose clamps should be replaced each time a new coolant hose is installed. This listing is one hose.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review