Heater Hose for 2004-2011 Ford Ranger & More - Gates 19373

$47.99

Vehicles this part fits

    Part number: 19373
    UPC: 072053637205
    Condition: New
    Weight: 0.78 LBS
    Item Package Quantity: 1
    $47.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19373
    Gates HVAC Heater Hose P/N:19373
    $47.99
    $47.99

    Gates 19373 heater hose for the 2004-2011 Ford Ranger V6 4.0L and other vehicles connects pipe 2 to the water pump. This Gates molded heater hose, also called an HVAC heater hose, carries engine coolant.

    • Small I.D. Molded Coolant Hose: factory-molded for today's smaller, tighter engine compartments
    • Used for coolant, water and air applications, and also approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube and EPDM cover over a synthetic fiber knit reinforcement
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 19373 heater hose
    • Also called: HVAC heater hose
    • Fits: 2004-2011 Ford Ranger V6 4.0L and other vehicles
    • Position: Pipe 2 to water pump
    • Material: EPDM
    • Condition: New

    A heater hose that is cracked, swollen or seeping coolant can be worn out. These signs alone do not prove the hose is the problem, since a leaking heater core can look much the same.

    Fits

    This heater hose is also a direct-fit replacement for the 2004-2005 Ford Explorer V6 4.0L and the 2004-2010 Mazda B4000 V6 4.0L, and a vehicle takes one hose.

    Specifications

    Fit and size

    • Position: pipe 2 to water pump
    • Quantity per vehicle: 1
    • Centerline length: 18.6 in (472 mm)
    • End 1 inside diameter: 0.62 in (16 mm)
    • End 2 inside diameter: 0.62 in (16 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose.

    Installation notes

    • Replace the hose clamps whenever a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer applications.

    Interchange: KH-403 · 4L54 18C266 FB · 4L5Z 18472 FA
    16380M · 64673 · 87734 · F10841 · 11373

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16380M, 19373, 64673, 87734, F10841, 4L54 18C266 FB, 4L5Z 18472 FA, KH-403, 11373

    Frequently Asked Questions

    Will this Ford Ranger heater hose fit a 2004-2011 Ford Ranger V6 4.0L?

    Yes. Gates 19373 fits the 2004-2011 Ford Ranger V6 4.0L, one hose per vehicle. If your vehicle is not named here, look it up in the "Vehicles it fits" section.

    Is this a heater hose for the 2004-2005 Ford Explorer V6 4.0L?

    Yes. Gates 19373 fits the 2004-2005 Ford Explorer V6 4.0L, and one hose is needed per vehicle.

    What are the inside diameter and length of this heater hose?

    Both ends have a 0.62 in (16 mm) inside diameter, and the centerline length is 18.6 in (472 mm).

    Can this EPDM heater hose be used for fuel or oil lines?

    No. This hose is for coolant, water and air applications, and is also approved for marine use. It must not be used for fuel or oil transfer.

    Do I need new hose clamps with this Gates heater hose?

    Yes. Replace the hose clamps whenever a new coolant hose goes on. This listing is one molded heater hose.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review