Gates 19429 heater hose for the 2006-2010 Toyota Highlander V6 3.3L and other vehicles carries coolant between components of the cooling system. It is a factory-molded, OEM-style hose made to fit today's smaller, tighter engine compartments.
- ThermalPro Premium molded heater hose line
- EPDM tube, synthetic fiber knit reinforcement and EPDM cover
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Works in coolant, water and air applications and is also approved for marine use
- Temperature range of -40°F to 275°F (-40°C to 135°C)
Quick facts
- Part: Gates 19429 heater hose
- Also called: HVAC heater hose
- Fits: 2006-2010 Toyota Highlander V6 3.3L and other vehicles
- Position: Inverter cooling hose-1
- Material: EPDM
- Condition: New
Cracks, swelling or coolant stains along the hose can mean it is wearing out. A leaking radiator cap, a worn water pump or a failing heater core can be behind the same signs, so find the cause before you buy a hose. Check the coolant level only with the engine cool.
Fits
This heater hose fits the 2006-2010 Toyota Highlander V6 3.3L and the 2006-2008 Lexus RX400h V6 3.3L, with one hose per vehicle.
Specifications
Fit and size
- Position: Inverter cooling hose-1
- Quantity per vehicle: 1
- Centerline length: 38.3 in (973 mm)
- Inside diameter, both ends: 0.65 in (17 mm)
Build and materials
- Construction: molded
- Material: EPDM
- Condition: New
- Country of origin: United States
Installation notes
- Replace the hose clamps each time a new coolant hose is installed.
- Do not use this hose for fuel or oil transfer.
Interchange: 18353L · F10842 · 11429 · 8724548640
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Does the Gates 19429 heater hose fit the 2006-2008 Lexus RX400h V6 3.3L?
Yes. Gates 19429 fits the 2006-2008 Lexus RX400h V6 3.3L, and it also fits the 2006-2010 Toyota Highlander V6 3.3L. Both take one hose.
What is the Gates molded heater hose made of?
Gates 19429 has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover. It is molded to shape at the factory.
Can this HVAC heater hose be used on a fuel or oil line?
No. It is not for fuel or oil transfer. It is made for coolant, water and air applications and is also approved for marine use.
What should I look for on an old heater hose before swapping in the 19429?
With the engine off and cool, look for cracks, swelling or coolant stains on the hose. A shop can pressure-test the cooling system if you can't find the source of a leak.
Do I need new hose clamps when I install the Gates 19429?
Yes. Put on new hose clamps whenever a new coolant hose goes in, rather than reusing the old ones.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review