Heater Hose for 2006-2008 Jeep Grand Cherokee & More - Gates 19514

$31.99

Vehicles this part fits

    Part number: 19514
    UPC: 770075387008
    Condition: New
    Weight: 1.00 LBS
    Item Package Quantity: 1
    $31.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19514
    Gates HVAC Heater Hose P/N:19514
    $31.99
    $31.99

    Gates 19514 heater hose for the 2006-2008 Jeep Grand Cherokee V8 5.7L or 6.1L and other vehicles carries engine coolant in the heater inlet position. This Gates molded heater hose is a factory-molded, OEM style hose sized for today's tighter engine compartments.

    • Gates Small I.D. Molded Coolant Hose, with 16 mm and 18 mm end inside diameters
    • Can be used for coolant, water and air, and is approved for marine applications
    • EPDM tube and EPDM cover with synthetic fiber knit reinforcement
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C)

    Quick facts

    • Part: Gates 19514 heater hose
    • Also called: HVAC heater hose
    • Fits: the 2006-2008 Jeep Grand Cherokee V8 5.7L or 6.1L and other vehicles
    • Position: Heater inlet
    • Material: EPDM
    • Condition: New

    A worn heater hose can show cracks, a soft or swollen spot, or dried coolant at the ends. A coolant smell or a low coolant level can come from other parts too, so with the engine off and cool, look the hose over and find where a leak starts before you replace it.

    Fits

    This heater hose fits the 2006-2008 and 2010 Jeep Grand Cherokee V8 5.7L or 6.1L and the 2007-2010 Jeep Commander V8 5.7L. The 2007-2010 Jeep Commander V8 5.7L takes one hose, and this listing is one hose.

    Specifications

    Fit and size

    • Position: heater inlet
    • Quantity per vehicle: 1
    • Centerline length: 20.3 in (516 mm)
    • End 1 inside diameter: 0.62 in (16 mm)
    • End 2 inside diameter: 0.72 in (18 mm)

    Build and materials

    • Material: EPDM
    • Construction: molded
    • Reinforcement: synthetic fiber knit
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use for fuel or oil transfer applications.

    Interchange: 16463M · 68000979AA · C90977 · 64246 · 11514

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16463M, 19514, 68000979AA, C90977, 64246, 11514

    Frequently Asked Questions

    Does the Gates 19514 work as a heater hose for the 2007-2010 Jeep Commander V8 5.7L?

    Yes. The Gates 19514 fits the 2007-2010 Jeep Commander V8 5.7L in the heater inlet position, and that vehicle takes one hose.

    What are the inside diameters of the Gates 19514 heater hose?

    The Gates 19514 has a 16 mm (0.62 in) inside diameter on end 1 and 18 mm (0.72 in) on end 2, with a centerline length of 516 mm (20.3 in).

    What is this HVAC heater hose made of?

    This heater hose has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover. It meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Can the Gates 19514 be used for fuel or oil?

    No, do not use this Gates 19514 for fuel or oil transfer. It can be used for coolant, water and air, and is approved for marine applications.

    Should I replace the hose clamps when installing this heater hose?

    Yes. Replace the hose clamps each time a new coolant hose is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review