Gates HVAC Heater Hose P/N:24178
Gates 19585 heater hose for the 2009-2016 Toyota Venza 4-cylinder 2.7L carries hot engine coolant to the heater. This Gates molded heater hose goes on the heater inlet.
Coolant drips near the hose ends, a cracked or swollen hose, or a falling coolant level can mean this hose is worn, though a loose hose clamp or a leaking heater core can also be behind them, so find the cause first.
This listing is one hose, a direct-fit replacement for the 2009-2016 Toyota Venza 4-cylinder 2.7L, which takes one.
Fit and size
Build and materials
Interchange: 16520M · F10867 · 11585 · 872450T030
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Gates 19585 heater hose right for the 2009-2016 Toyota Venza 4-cylinder 2.7L?
Yes. Gates 19585 fits the 2009-2016 Toyota Venza 4-cylinder 2.7L as the heater inlet hose, and that engine takes one.
What are the length and inside diameter of this molded hose?
The centerline length is 22.2 in (564 mm). Both ends have a 0.63 in (16 mm) inside diameter.
Is this Gates heater hose approved for marine use?
Yes. Gates 19585 is approved for marine applications, as well as coolant, water and air use.
What temperature range can this HVAC heater hose handle?
It is rated from -40°F to 275°F (-40°C to 135°C). The hose has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover.
Does the Gates 19585 replace hose number 16520M?
Yes. 16520M is one of the numbers Gates 19585 replaces, along with F10867, 11585 and 872450T030.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.