Heater Hose for 2010-2015 Toyota 4Runner - Gates 19590

$109.99

Vehicles this part fits

    Part number: 19590
    UPC: 770075467540
    Condition: New
    Weight: 2.26 LBS
    Item Package Quantity: 1
    $109.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19590
    Gates HVAC Heater Hose P/N:19590
    $109.99
    $109.99

    Gates 19590 heater hose for the 2010-2015 Toyota 4Runner V6 4.0L carries hot engine coolant to the cabin heater circuit. Also called an HVAC heater hose, this Gates molded heater hose handles coolant, water and air.

    • Factory-molded to fit today's smaller, tighter engine compartments
    • Approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40°F to 275°F (-40°C to 135°C)

    Quick facts

    • Part: Gates 19590 heater hose
    • Also called: HVAC heater hose
    • Fits: 2010-2015 Toyota 4Runner V6 4.0L
    • Position: Splice to pipe-2
    • Material: EPDM
    • Condition: New

    Coolant drips, a hose that feels soft or looks swollen or cracked, and a falling coolant level can all be signs of a failing heater hose. With the engine off and cold, look along the hose and at both ends for damp spots, because a wet end can also be a loose clamp, so find the source before replacing anything. This listing is one hose, and the application takes one.

    Fits

    This hose is a direct-fit replacement for the 2010-2015 Toyota 4Runner V6 4.0L.

    Specifications

    Fit and size

    • Position: Splice to pipe-2
    • Quantity per vehicle: 1
    • Centerline length: 805 mm (31.7 in)
    • End 1 inside diameter: 16 mm (0.63 in)
    • End 2 inside diameter: 16 mm (0.63 in)

    Build and materials

    • Material: EPDM
    • Construction: molded
    • Reinforcement: synthetic fiber knit
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range: -40°F to 275°F (-40°C to 135°C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose goes on.
    • Not for fuel or oil transfer applications.

    Interchange: 18420L · F10869 · 11590 · 8724560G10

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18420L, 19590, F10869, 11590, 8724560G10

    Frequently Asked Questions

    Is Gates 19590 the 4Runner heater hose for 2010-2015 Toyota models with the V6 4.0L?

    Yes. Gates 19590 is a direct-fit heater hose for the 2010-2015 Toyota 4Runner V6 4.0L, and the application takes one.

    What size is the Gates 19590 heater hose?

    Gates 19590 has a 16 mm (0.63 in) inside diameter at both ends and an 805 mm (31.7 in) centerline length.

    Can this Gates heater hose be used for fuel or oil lines?

    No. It is for coolant, water and air applications only and must not be used for fuel or oil transfer. The tube and cover are EPDM.

    What does a worn heater hose look like?

    With the engine off and cool, look for cracks, bulges, soft spots or damp coolant stains along the hose and at its ends. A shop can pressure-test the system if you can't find the source.

    What temperature range does the Gates molded heater hose handle?

    It is rated for -40°F to 275°F (-40°C to 135°C). It also meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review