Heater Hose for 1990-1995 Ford Taurus & More - Gates 19602

$42.99

Vehicles this part fits

    Part number: 19602
    UPC: 072053178340
    Condition: New
    Weight: 1.11 LBS
    Item Package Quantity: 1
    $42.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19602
    Gates HVAC Heater Hose P/N:19602
    $42.99
    $42.99

    Gates 19602 heater hose for the 1990-1995 Ford Taurus V6 3.8L and other vehicles carries engine coolant through the heater circuit. This Gates 3/4 inch heater hose is molded with a 19 mm inside diameter at both ends.

    • Gates Small I.D. Molded Coolant Hose line, usable for coolant, water and air and approved for marine applications
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Factory-molded shape made for smaller, tighter engine compartments
    • Temperature range of -40°F to 275°F (-40°C to 135°C)

    Quick facts

    • Part: Gates 19602 heater hose
    • Also called: HVAC heater hose
    • Fits: 1990-1995 Ford Taurus V6 3.8L and other vehicles
    • Position: Heater to pipe-1, valve to intake manifold
    • Material: EPDM
    • Condition: New

    A coolant leak, a cracked or swollen hose or a sweet smell near the hose can mean this heater hose (also sold as an HVAC heater hose) is worn, though a leaking heater core or a heater control valve can be behind them too, so find the source before replacing it. Look only when the engine is cool. This listing is one hose, and the fitment calls for one per vehicle.

    Fits

    The 1990-1995 Ford Taurus V6 3.8L is joined by the 1994-1995 Ford Sable V6 3.8L and the 1990-1995 Mercury Sable V6 3.8L, among many others. Owners of other models should open the "Vehicles it fits" section and look up their own model and engine.

    Specifications

    Fit and size

    • Position: heater to pipe-1, valve to intake manifold
    • Quantity per vehicle: 1
    • Centerline length: 20.8 in (528 mm)
    • End 1 inside diameter: 0.75 in (19 mm)
    • End 2 inside diameter: 0.75 in (19 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: F1OY 18472 E · 18117L · 63242 · E88351 · 10021320 · 10069157 · 14101516 · 11602

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18117L, 19602, 63242, E88351, F1OY 18472 E, 10021320, 10069157, 14101516, 11602

    Frequently Asked Questions

    Will this Taurus heater hose fit a 1990-1995 Ford Taurus V6 3.8L?

    Yes. Gates 19602 is listed for the 1990-1995 Ford Taurus V6 3.8L, with one hose per vehicle. For other models, open the "Vehicles it fits" section.

    What is the Gates molded heater hose made of?

    Gates 19602 has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover. It is molded to shape.

    Can I use this Gates heater hose for fuel or oil lines?

    No. This hose is for coolant, water and air applications and is also approved for marine use. It is not for fuel or oil transfer.

    Should I put new clamps on with this heater hose?

    Yes. Hose clamps should be replaced each time a new coolant hose is installed.

    How long is this hose, and what are its end sizes?

    The centerline length is 20.8 in (528 mm). Both ends have a 0.75 in (19 mm) inside diameter.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review