Heater Hose for 2012-2016 Tesla S & More - Gates 19659

$23.99
Sold out

Vehicles this part fits

    Part number: 19659
    UPC: 072053411270
    Condition: New
    Weight: 0.39 LBS
    Item Package Quantity: 1
    $23.99

    Out of stock

    Have questions?

    Gates HVAC Heater Hose P/N:19659
    Gates HVAC Heater Hose P/N:19659
    $23.99
    $23.99

    Gates 19659 cooling system components for the 2012-2016 Tesla S and other vehicles come as a single ThermalPro Premium Molded Heater Hose, which carries coolant in the heater circuit. It is shaped at the factory for smaller, tighter engine compartments.

    • Factory-molded, OEM style hose with a small I.D.
    • Can be used for coolant, water and air applications, and is approved for marine applications.
    • Engineered to resist electrochemical degradation, the leading cause of hose failure.
    • EPDM tube, synthetic fiber knit reinforcement, EPDM cover.
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
    • Temperature range: -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C).

    A cracked, swollen or soft hose, coolant seeping at the ends, or a drop in coolant level can mean a heater hose is wearing out. Check the coolant level only when the engine is cool. A cold heater on its own does not prove the hose is the problem, since a thermostat stuck open is another common cause.

    It is also a direct-fit replacement for the 1993-1998 Nissan Quest 3.0L and the 1993-1998 Mercury Villager 3.0L.

    Specifications

    Fit and size

    • Position: tee to intake manifold (inlet), sensor to dual-pipe cooling assembly
    • Quantity per vehicle: 1
    • Centerline length: 12.7 in (323 mm)
    • End 1 inside diameter: .72 in (18 mm)
    • End 2 inside diameter: .72 in (18 mm)
    • Branches: 0; quick-connect fittings: 0

    Build and materials

    • Type: molded heater hose
    • Material: EPDM
    • Country of origin: United States

    In the box

    One heater hose. This listing holds one, and each vehicle takes one.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer applications.

    Interchange: F3XY 18472 P · 16167M · 924020B010 · F10874 · 11659 · 600830500E

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16167M, 19659, 924020B010, F10874, F3XY 18472 P, 11659, 600830500E

    Frequently Asked Questions

    Does the Gates 19659 heater hose fit a 2012-2016 Tesla S?

    Yes. Gates 19659 fits the 2012-2016 Tesla S and the 1993-1998 Nissan Quest 3.0L, and each vehicle takes one hose.

    What are the inside diameter and length of the Gates 19659 heater hose?

    Both ends have an 18 mm (.72 in) inside diameter, and the centerline length is 323 mm (12.7 in). The hose is molded and has no branches.

    Can I use this molded heater hose for fuel or oil lines?

    No. It must not be used for fuel or oil transfer. It is made for coolant, water and air applications and is also approved for marine use.

    Do I need new hose clamps with a Gates 19659 heater hose?

    Yes. New hose clamps are the right call whenever a new coolant hose is installed, and Gates 19659 is no exception.

    What temperatures can this EPDM heater hose handle?

    It is rated from -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C). The tube and cover are EPDM with synthetic fiber knit reinforcement.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review