Heater Hose for 2008 Ford Escape & More - Gates 19880

$56.99

Vehicles this part fits

    Part number: 19880
    UPC: 770075419761
    Condition: New
    Weight: 3.53 LBS
    Item Package Quantity: 1
    $56.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19880
    Gates HVAC Heater Hose P/N:19880
    $56.99
    $56.99

    Gates 19880 heater hose for the 2008 Ford Escape 4-cylinder 2.3L and other vehicles carries hot engine coolant for the heating system. It is also listed as an HVAC heater hose.

    • ThermalPro Premium line: Gates molded heater hose, factory-molded for smaller, tighter engine compartments
    • Gates 3/4 heater hose with a 0.75 in (19 mm) inside diameter at both ends
    • Hose for coolant, water and air applications, also approved for marine applications
    • Hose engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover; meets SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 19880 heater hose
    • Also called: HVAC heater hose
    • Fits: 2008 Ford Escape 4-cylinder 2.3L and other vehicles
    • Position: Pipe to engine, engine to valve
    • Material: EPDM
    • Condition: New

    Signs this hose is wearing out include coolant at a clamp or hose end, a swollen hose or a heater that blows cool air. These can mean this hose is worn, though the thermostat or the heater core can be behind the same heater trouble. Look it over only with the engine off and cool.

    Fits

    This hose fits the 2008 Ford Escape 4-cylinder 2.3L, the 2008 Mazda Tribute 4-cylinder 2.3L and the 2006-2007 Mercury Mariner 4-cylinder 2.3L, with one hose per vehicle.

    Specifications

    Fit and size

    • Position: pipe to engine, engine to valve
    • Quantity per vehicle: 1
    • Centerline length: 35.2 in (894 mm)
    • Inside diameter, both ends: 0.75 in (19 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Condition: new
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new heater hose is installed.

    Interchange: 8M6Z 18C553 A · 18395L · F10907 · 11880

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18395L, 19880, F10907, 8M6Z 18C553 A, 11880

    Frequently Asked Questions

    Does Gates 19880 work as a heater hose for the 2008 Ford Escape 4-cylinder 2.3L?

    Yes. Gates 19880 is listed for the 2008 Ford Escape with the 4-cylinder 2.3L engine, and that Escape takes one hose.

    What is this Gates heater hose made of?

    Gates 19880 has an EPDM tube and an EPDM cover, with synthetic fiber knit reinforcement.

    Can this heater hose be used on fuel or oil lines?

    No. It is not for fuel or oil transfer applications. It is made for coolant, water and air, and is approved for marine use.

    How can I tell if this EPDM heater hose is worn out?

    With the engine off and cool, look along the hose for cracks, a swollen section or coolant residue at the ends. A shop can test the cooling system if the hose looks fine.

    Should I replace the hose clamps when I install Gates 19880?

    Yes. Replace the hose clamps each time you install a new heater hose such as Gates 19880.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review