Lower Heater Hose for 2010-2012 Ford Fusion & More - Gates 19888

$72.99

Vehicles this part fits

    Part number: 19888
    UPC: 770075458012
    Condition: New
    Weight: 2.87 LBS
    Item Package Quantity: 1
    $72.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19888
    Gates HVAC Heater Hose P/N:19888
    $72.99
    $72.99

    Gates 19888 lower heater hose for the 2010-2012 Ford Fusion V6 3.0L and other vehicles carries engine coolant from the reservoir to the lower hose. The Gates molded heater hose is a factory-molded, OEM-style hose shaped for today's smaller, tighter engine compartments.

    • Part of the Gates Small I.D. Molded Coolant Hose line
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
    • Can be used for coolant, water and air applications, and is approved for marine applications

    Quick facts

    • Part: Gates 19888 heater hose
    • Also called: HVAC heater hose
    • Fits: 2010-2012 Ford Fusion V6 3.0L and other vehicles
    • Position: Reservoir to lower hose
    • Material: EPDM
    • Condition: New

    A coolant leak, a soft or swollen hose or cracks in the cover can mean a heater hose is wearing out. A loose clamp, a thermostat housing or a radiator connection can be behind those signs too, so find the cause before buying. Look at the hose only with the engine off and cool.

    Fits

    This hose fits the 2010-2012 Ford Fusion V6 3.0L and the 2010-2011 Mercury Milan V6 3.0L. A single hose goes in that reservoir-to-lower-hose position on each of them.

    Specifications

    Fit and size

    • Position: reservoir to lower hose
    • Quantity per vehicle: 1
    • Centerline length: 29.5 in (749 mm)
    • End 1 inside diameter: 0.73 in (19 mm)
    • End 2 inside diameter: 0.97 in (25 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 9E5Z 8075 A
    16497M · 64610 · E91228 · 11571

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16497M, 19888, 64610, E91228, 9E5Z 8075 A, 11571

    Frequently Asked Questions

    Is this the right heater hose for the 2010-2012 Ford Fusion V6 3.0L?

    Yes. Gates 19888 is a lower heater hose for the 2010-2012 Ford Fusion V6 3.0L, and it also fits the 2010-2011 Mercury Milan V6 3.0L.

    Is this Gates heater hose approved for marine use?

    Yes. Gates 19888 can be used for coolant, water and air applications and is also approved for marine applications. It is not for fuel or oil transfer.

    What is this HVAC heater hose made of?

    The hose has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover. It meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    What are the inside diameters and length of this lower heater hose?

    End 1 has a 19 mm (0.73 in) inside diameter and end 2 has 25 mm (0.97 in). The centerline length is 749 mm (29.5 in).

    Should I replace the hose clamps when installing this heater hose?

    Yes. New hose clamps go on whenever a new coolant hose is fitted, so have them ready for this one.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review