Lower Heater Hose for 2003-2007 Ford F-250 Super Duty & More - Gates 22953

$109.99

Vehicles this part fits

    Part number: 22953
    UPC: 072053583045
    Condition: New
    Weight: 1.29 LBS
    Item Package Quantity: 1
    $109.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:22953
    Gates HVAC Heater Hose P/N:22953
    $109.99
    $109.99

    Gates 22953 lower heater hose for the 2003-2007 Ford F-250 Super Duty V8 6.0L and other vehicles carries engine coolant through the heater circuit. This Gates heater hose is a molded modular coolant hose made to fit specific applications.

    • Gates Modular Coolant Hose design with an outlet included
    • Molded EPDM tube with synthetic fiber knit reinforcement and an EPDM cover resistant to heat, ozone and coolant chemicals
    • Materials engineered to resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 EC Class D1 under 25 mm ID and SAE 20R4 EC Class D1 at 25 mm ID and over
    • Temperature range of -40°F to +257°F (-40°C to +125°C)

    Quick facts

    • Part: Gates 22953 heater hose
    • Also called: HVAC heater hose
    • Fits: 2003-2007 Ford F-250 Super Duty V8 6.0L and other vehicles
    • Position: Reservoir (lower)
    • Material: EPDM, plastic
    • Condition: New

    A heater hose that leaks, cracks, feels soft or collapses, or a drop in cabin heat with coolant loss, may mean it is due for replacement. A leaking heater core, a failing thermostat or a loose clamp can also be behind coolant loss or weak heat, so find the cause before you buy.

    Fits

    It is listed for a wide range of Ford models, led by the 2003-2007 Ford F-250 Super Duty V8 6.0L, the 2003-2007 Ford F-350 Super Duty V8 6.0L and the 2003-2007 Ford F-450 Super Duty V8 6.0L. The 2003-2007 Ford F-250 Super Duty V8 6.0L takes one. If your Ford is not named here, look for your own year, model and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: reservoir (lower)
    • Centerline length: 19.3 in (490 mm)
    • End 1 inside diameter: 25 mm (0.99 in)
    • End 2 inside diameter: 25 mm (0.99 in)
    • Branches: 0; quick-connect fittings: 0
    • Quantity per vehicle: 1

    Build and materials

    • Construction: molded, modular
    • Modular component included: outlet
    • Material: EPDM, plastic
    • Contains spring: No
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose with its outlet.

    Installation notes

    • Replace the clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer applications.

    Interchange: 626-214 · 626-606 · 3C3Z 8075 AE · 5C34 8C351 CA · 5C3Z 8075 CA · 5C3Z 8075 CB
    24530L · 64352 · 72758 · E72758 · KM4697 · KM4848 · 9588

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    24530L, 22953, 64352, 72758, E72758, 626-214, 626-606, 3C3Z 8075 AE, 5C34 8C351 CA, 5C3Z 8075 CA, 5C3Z 8075 CB, KM4697, KM4848, 9588

    Frequently Asked Questions

    Is this a Ford F-250 Super Duty heater hose for the 2003-2007 V8 6.0L model?

    Yes. Gates 22953 is listed for the 2003-2007 Ford F-250 Super Duty V8 6.0L. For another vehicle, look up its year and engine in the "Vehicles it fits" section.

    What is the Gates molded heater hose made of?

    Gates 22953 uses an EPDM tube reinforced with synthetic fiber knit, and its EPDM cover handles heat, ozone and coolant. The listed material is EPDM and plastic.

    What temperature range does this HVAC heater hose handle?

    Gates 22953 is rated for -40°F to +257°F (-40°C to +125°C). It is classed SAE 20R3 or 20R4 EC Class D1, depending on the hose inside diameter.

    What are the inside diameter and length of the Gates 22953 hose?

    Both ends have a 25 mm (0.99 in) inside diameter, and the centerline length is 490 mm (19.3 in). This hose has no branches and no quick-connect fittings.

    Should the clamps be replaced when this heater hose goes on?

    Yes. A new coolant hose should go on with new clamps. This hose is for coolant only, not for fuel or oil transfer.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review