Heater Hose for 2003-2004 Ford Expedition - Gates 23258

$143.99

Vehicles this part fits

    Part number: 23258
    UPC: 770075326991
    Condition: New
    Weight: 3.50 LBS
    Item Package Quantity: 1
    $143.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:23258
    Gates HVAC Heater Hose P/N:23258
    $143.99
    $143.99

    Gates 23258 heater hose for the 2003-2004 Ford Expedition V8 4.6L or 5.4L carries hot engine coolant to and from the heater. This Gates heater hose replaces the line that runs from the heater to the valve and from the valve to the engine.

    • Gates Modular Coolant Hose assembly with one branch and one female quick connector built in
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 at 25 mm (1 in.) ID and over
    • Temperature range of -40°F to +257°F (-40°C to +125°C)

    Quick facts

    • Part: Gates 23258 heater hose
    • Also called: HVAC heater hose
    • Fits: 2003-2004 Ford Expedition V8 4.6L or 5.4L
    • Position: heater to valve, valve to engine
    • Material: EPDM, plastic, steel
    • Condition: New

    Coolant drips, a soft or swollen hose, or a heater that blows cool air can mean this hose is worn, though a stuck thermostat or a clogged heater core can be behind the same signs, so find the cause before you replace it.

    Fits

    This hose fits the 2003-2004 Ford Expedition V8 4.6L or 5.4L, and either engine takes one.

    Specifications

    Fit and size

    • Position: heater to valve, valve to engine
    • Quantity per vehicle: 1
    • End 1 inside diameter: 16 mm (0.62 in)
    • End 2 inside diameter: 19 mm (0.73 in)
    • End 3 inside diameter: 0.62 in
    • Centerline length: 315 mm (12.4 in)

    Build and materials

    • Construction: molded, modular assembly
    • Modular components: 1 branch, 1 female quick connector
    • Material: EPDM, plastic, steel
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose with one branch and one female quick connector.

    Installation notes

    • Replace the clamps whenever a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer.

    Interchange: KH-405
    2L1Z 18472 BB · 3L1Z 18472 AA · 4L1Z 18472 BA · 4L1Z 18472 BB · 24600L · 64358 · C91053 · 16118

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    24600L, 23258, 64358, C91053, 2L1Z 18472 BB, 3L1Z 18472 AA, 4L1Z 18472 BA, 4L1Z 18472 BB, KH-405, 16118

    Frequently Asked Questions

    Is Gates 23258 the right heater hose for the 2003-2004 Ford Expedition V8 4.6L or 5.4L?

    Yes. Gates 23258 fits the 2003-2004 Ford Expedition V8 4.6L or 5.4L, and either engine takes one.

    Does this Gates molded heater hose come with the branch and quick connector?

    Yes. Gates 23258 is a modular hose with one branch and one female quick connector already part of the assembly.

    What temperature range does this HVAC heater hose handle?

    This hose is rated for -40°F to +257°F (-40°C to +125°C), and its EPDM cover resists heat, ozone and chemical coolants.

    How do I check a heater hose for wear on a cold engine?

    With the engine off and cool, look along the hose for cracks, swelling, soft spots or coolant residue near the ends.

    Can Gates 23258 carry fuel or oil?

    No. Gates 23258 is a coolant hose and is not for fuel or oil transfer.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review