Lower Heater Hose for 2011-2019 Ford F-250 Super Duty & More - Gates 51443

$152.99

Vehicles this part fits

    Part number: 51443
    UPC: 770075781561
    Condition: New
    Weight: 1.29 LBS
    Item Package Quantity: 1
    $152.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:51443
    Gates HVAC Heater Hose P/N:51443
    $152.99
    $152.99

    Gates 51443 lower heater hose for the 2011-2019 Ford F-250 Super Duty V8 6.7L and other vehicles carries coolant through a molded EPDM tube. This Gates molded heater hose has a female quick connector built into the modular assembly.

    • Gates Modular Coolant Hose with an integrated female quick connector
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Temperature range: -40°F to +257°F (-40°C to +125°C)
    • Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID, SAE 20R4 EC Class D1 for 25 mm (1 in.) ID and over

    Quick facts

    • Part: Gates 51443 heater hose
    • Also called: HVAC heater hose
    • Fits: 2011-2019 Ford F-250 Super Duty V8 6.7L and other vehicles
    • Position: Reservoir (lower)
    • Material: EPDM, plastic
    • Condition: New

    Coolant seepage at the hose, a cracked or swollen cover, or a hose that feels soft or collapsed can mean the Gates heater hose is worn. Look with the engine off and cool. Before you replace it, rule out a loose clamp or a weeping fitting at either end, since a leak there looks just the same.

    Fits

    The 2011-2019 Ford F-250 Super Duty V8 6.7L, the 2011-2019 Ford F-350 Super Duty V8 6.7L and the 2011-2019 Ford F-450 Super Duty V8 6.7L take this heater hose, and so do other vehicles; each takes one. If your truck isn't named here, look it up in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: Reservoir (lower)
    • Quantity per vehicle: 1
    • Centerline length: 19.5 in (495 mm)
    • End 1 inside diameter: 24 mm (0.96 in)
    • End 2 inside diameter: 32 mm (1.25 in)
    • Quick connect fittings: 1
    • Branches: 0

    Build and materials

    • Material: EPDM, plastic
    • Construction: molded, modular
    • Modular component: female quick connector
    • Contains spring: No
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose with a female quick connector.

    Installation notes

    • Replace the clamps each time a new coolant hose goes on.
    • Do not use this hose for fuel or oil transfer.

    Interchange: 626-716 · 626-834
    BC34 8C633 CC · BC3Z 8C633 A · BC3Z 8C633 B · HC3Z 8C633 A · F11211 · KM5278

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    626-716, 626-834, F11211, BC34 8C633 CC, BC3Z 8C633 A, BC3Z 8C633 B, HC3Z 8C633 A, KM5278, 51443

    Frequently Asked Questions

    Will the Ford F-250 Super Duty heater hose 51443 fit a 2011-2019 truck with the V8 6.7L?

    Yes, Gates 51443 fits the 2011-2019 Ford F-250 Super Duty V8 6.7L, and each truck takes one; for another truck, check the "Vehicles it fits" section.

    What is this Gates HVAC heater hose made of?

    Gates 51443 has an EPDM tube, synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover. Its material is EPDM and plastic.

    Does the Gates molded heater hose 51443 include a quick connector?

    Yes, Gates 51443 comes with one female quick connector built into the molded hose, and it has no hose branches.

    How long is this heater hose, and what are its inside diameters?

    The centerline length is 19.5 in (495 mm). End 1 has a 24 mm (0.96 in) inside diameter and end 2 has a 32 mm (1.25 in) inside diameter.

    Do the clamps need replacing when I install this heater hose?

    Yes, swap in new clamps whenever a new coolant hose is installed. This hose is not for fuel or oil transfer.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review