Gates HVAC Heater Hose P/N:51561

Be the first to review this product

$102.99

MPN: 51561

UPC: 770075806509

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:51561

$102.99

Description

Keep coolant moving to the heater core with the Gates heater hose (P/N 51561), a premium modular coolant hose that drops in as a direct-fit replacement for the 2006-2010 Mazda 5 (see the Buyer's Guide tab for the full engine list). Gates leads the modular assembly coolant hose segment, building each hose to specific applications with OEM-exact integrated components — quick connects, branch connectors/tees, sensors and restrictors — so it matches the original assembly. It is cataloged for the heater (lower) position, and is also listed as an hvac heater hose.

EPDM construction: EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.
Collapse- and degradation-resistant: specifically engineered materials resist collapse under vacuum and resist electrochemical degradation, the leading cause of hose failure.
SAE rated: meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID and SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over.
Wide temperature range: rated from -40°F to +257°F (-40°C to +125°C).

Gates recommends installing new clamps each time a coolant hose is replaced. Do not use for fuel or oil transfer applications.

Interchange: F11234 · CC446124YB

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

F11234, CC446124YB, 51561

Frequently Asked Questions

What vehicles does the Gates 51561 heater hose fit?

It's a direct-fit replacement for the 2006-2010 Mazda 5. Check the Buyer's Guide tab to confirm the exact engine for your vehicle.

What is this heater hose made of?

It has an EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone- and chemical coolant-resistant EPDM cover.

What does this hose do?

It routes engine coolant to and from the heater core so the cabin heater and coolant circuit work as intended. It's cataloged for the heater (lower) position.

Do I need new clamps when I install it?

Gates recommends installing new clamps each time a coolant hose is replaced, so plan to fit fresh clamps during the job.

Can I use this hose for fuel or oil lines?

No. Gates cautions that it's for coolant service only — do not use it for fuel or oil transfer applications.