Gates HVAC Heater Hose P/N:51570

Be the first to review this product

$117.99

MPN: 51570

UPC: 770075784357

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:51570

$117.99

Description

Keep cabin heat and coolant flowing with the Gates heater hose, part number 51570 — a Premium Modular Coolant Hose engineered to fit the 2010-2018 Lexus GX460. Gates leads the modular assembly coolant hose segment, building each hose to specific applications with the OEM-exact integrated components the original coolant routing relies on, such as quick connects, branch connectors/tees and sensors. This one is cataloged for the pipe-to-pipe (outlet) position.

EPDM construction: EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone- and chemical coolant-resistant EPDM cover.
Vacuum resistant: specifically-engineered materials resist collapse under vacuum.
Degradation resistant: engineered to resist electrochemical degradation, the leading cause of hose failure.
Rated to spec: meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID and SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over, with a temperature range of -40°F to +257°F (-40°C to +125°C).

Gates recommends installing new clamps each time a coolant hose is replaced. Do not use this hose for fuel or oil transfer applications.

Interchange: 20828S · F11237 · 8720960D81

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

20828S, F11237, 51570, 8720960D81

Frequently Asked Questions

What vehicle does the Gates 51570 heater hose fit?

It's engineered to fit the 2010-2018 Lexus GX460. Check the Buyer's Guide tab to confirm the exact application for your vehicle.

What is the Gates hvac heater hose 51570 and what does it do?

It's a modular coolant hose that carries engine coolant to and from the heater core so the HVAC system can warm the cabin. It's cataloged for the pipe-to-pipe (outlet) position.

What is this hose made of?

It uses an EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone- and chemical coolant-resistant EPDM cover.

Should I replace the clamps when installing it?

Yes — Gates recommends installing new clamps each time a coolant hose is replaced.

Can I use it for fuel or oil lines?

No. Gates cautions against using this hose for fuel or oil transfer applications; it's built for coolant only.