Gates HVAC Heater Hose P/N:52097

Be the first to review this product

$31.99

MPN: 52097

UPC: 770075864172

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:52097

$31.99

Description

Route coolant to the heater core with the Gates Heater Hose 52097, a direct-fit modular replacement for the 2015-2019 Ford F Series Pickup, the 2015-2020 Ford F-150, and the 2015-2016 and 2020 Ford Lobo (see the Buyer's Guide tab for engine-level fitment). This GATES heater hose is manufactured to fit specific applications and integrates the OEM-exact components the original uses — quick connects, branch connectors/tees, sensors and restrictors — for the reservoir (lower), thermostat-to-connector run.

Modular assembly: built with OEM-exact hose components so it matches the original layout on the listed applications.
EPDM construction: EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.
Vacuum-resistant: specifically-engineered materials resist collapse under vacuum, and the hose is engineered to resist electrochemical degradation.
Rated: meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 for 25 mm and over; temperature range -40°F to +257°F (-40°C to +125°C).

Gates recommends replacing the clamps whenever a new coolant hose is installed. Do not use for fuel or oil transfer applications.

Interchange: FL3Z 8C289 A
FL3Z8C289A · F11386

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

F11386, FL3Z 8C289 A, 52097

Frequently Asked Questions

What vehicles does the Gates 52097 hvac heater hose fit?

It is a direct-fit replacement for the 2015-2019 Ford F Series Pickup, 2015-2020 Ford F-150, and the 2015-2016 and 2020 Ford Lobo. Check the Buyer's Guide tab for engine-level fitment.

What is this hose made of?

It uses an EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.

Where does this hose route on the engine?

It serves the reservoir (lower), thermostat-to-connector coolant path and is built with the OEM-exact quick connects, branch connectors/tees and sensors the original assembly uses.

What standards does it meet?

It meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 for 25 mm and over, with a temperature range of -40°F to +257°F.

Should I replace the clamps when installing it?

Yes. Gates recommends replacing the clamps each time a new coolant hose is installed. Do not use this hose for fuel or oil transfer applications.