Gates 21412 lower radiator coolant hose for the 1984-1985 Chrysler Town & Country 4-cylinder 2.2L and other vehicles carries coolant between the radiator and the engine. This Gates radiator coolant hose is built to OEM-quality specifications.
- Specifically engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, a leading cause of hose failure
- Pre-shaped to fit and to seal the connections
- EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets SAE 20R4 class D2 and DIN 73411 class A, except for tolerances
- Temperature range from -40°F to +257°F (-40°C to +125°C)
Quick facts
- Part: Gates 21412 radiator coolant hose
- Fits: 1984-1985 Chrysler Town & Country 4-cylinder 2.2L and other vehicles
- Position: Lower
- Material: EPDM
- Condition: New
A lower hose that weeps coolant, feels soft or swollen, or shows cracks may be worn out. Coolant loss can have other sources, so find where it is coming from before you replace the hose. With the engine off and cool, look over the hose and both ends for wet spots, cracks and bulges; a shop can pressure-test the cooling system.
Fits
This hose is listed for a wide range of Chrysler, Dodge and Plymouth models, including the 1984-1985 Dodge 600 4-cylinder 2.2L and the 1984-1985 Dodge Aries 4-cylinder 2.2L, and each car takes one. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
Fit and size
- Position: Lower
- Quantity per vehicle: 1
- Centerline length: 32.5 in (826 mm)
- Inside diameter, both ends: 1.5 in (38 mm)
Build and materials
- Construction: Molded, without a spring
- Material: EPDM
- Reinforcement: Synthetic fiber knit
- Condition: New
- Country of origin: United States
In the box
One lower radiator coolant hose.
Installation notes
- Replace the hose clamps each time a new coolant hose is installed.
- Do not use this hose for fuel or oil transfer.
Interchange: MH-4412 · 14-1789-6 · KM-2151 · 77-8786-4
26104X · MC133 · C1412 · 4266722 · 4266761 · 4266762 · 4266763 · 61286 · 71197 · E71197 · 41286 · 325 · H0061286 · 8109 · 2152
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
26104X, MC133, MH-4412, C1412, 14-1789-6, 21412, 4266722, 4266761, 4266762, 4266763, 61286, 71197, E71197, 41286, 325, H0061286, KM-2151, 8109, 2152, 77-8786-4
Frequently Asked Questions
Is the Gates lower radiator hose 21412 right for the 1984-1985 Dodge Aries 4-cylinder 2.2L?
Yes. Gates 21412 is listed for the 1984-1985 Dodge Aries 4-cylinder 2.2L, and each car takes one hose. For other models, open the "Vehicles it fits" section.
What temperature range does this Gates coolant hose handle?
Gates 21412 is rated from -40°F to +257°F (-40°C to +125°C). It is not meant for fuel or oil transfer.
What is this Gates molded coolant hose made of?
The tube and the cover are EPDM, with synthetic fiber knit reinforcement. The cover resists heat, ozone and chemical coolants.
How long is Gates 21412 and what are its end diameters?
Gates 21412 has a centerline length of 32.5 in (826 mm). Both ends have a 1.5 in (38 mm) inside diameter, and the hose has no spring.
Should I replace the hose clamps when fitting this lower radiator coolant hose?
Yes. The clamps should be replaced each time a new coolant hose is installed, so plan on new ones.
