Upper Radiator Coolant Hose for 1985-1987 BMW 735i & More - Gates 21656

$59.99

Vehicles this part fits

    Part number: 21656
    UPC: 072053059908
    Condition: New
    Weight: 1.47 LBS
    Item Package Quantity: 1
    $59.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:21656
    Gates Radiator Coolant Hose P/N:21656
    $59.99
    $59.99

    Gates 21656 upper radiator coolant hose for the 1985-1987 BMW 735i 6-cylinder 3.5L and other vehicles carries coolant between the engine and the radiator. This Gates molded coolant hose is made to OEM-quality specifications.

    • Materials engineered to resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed connections
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Temperature range of -40°F to +257°F (-40°C to +125°C)
    • Meets requirements of SAE 20R4 class D2 and DIN 73411 class A, except for tolerances

    Quick facts

    • Part: Gates 21656 radiator coolant hose
    • Fits: 1985-1987 BMW 735i 6-cylinder 3.5L and other vehicles
    • Position: Upper
    • Material: EPDM
    • Condition: New

    A leak at the hose ends, a swollen or cracked hose, or a collapsed hose can mean this radiator coolant hose is worn, though a loose clamp or a faulty radiator cap can also be behind them.

    Fits

    It fits the 1985-1987 BMW 735i 6-cylinder 3.5L, the 1986-1987 BMW L7 6-cylinder 3.5L and the 1979-1984 BMW 733i 6-cylinder 3.2L.

    Specifications

    Fit and size

    • Position: Upper
    • Quantity per vehicle: 1
    • Centerline length: 16.3 in (414 mm)
    • End 1 inside diameter: 1.62 in (41 mm)
    • End 2 inside diameter: 1.75 in (44 mm)

    Build and materials

    • Material: EPDM
    • Construction: Molded
    • Spring: none
    • Condition: New
    • Country of origin: United States

    In the box

    One radiator coolant hose. This listing holds one hose, and these BMWs take one upper hose each.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: MH-4656 · 142-6011 · KM-2259
    115311265271 · 24212L · 1265271 · 12652712 · D90555 · 41478 · 61478 · 8372

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    115311265271, 24212L, MH-4656, 1265271, 12652712, 142-6011, 21656, D90555, 41478, 61478, KM-2259, 8372

    Frequently Asked Questions

    Is the Gates radiator coolant hose 21656 right for the 1986-1987 BMW L7 6-cylinder 3.5L?

    Yes. Gates 21656 upper radiator coolant hose fits the 1986-1987 BMW L7 6-cylinder 3.5L, and that car takes one hose.

    Is this Gates coolant hose made of EPDM?

    Yes. Gates 21656 has an EPDM tube, synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.

    Can this hose be used for fuel or oil lines?

    No. This radiator coolant hose is for coolant applications only and must not be used for fuel or oil transfer.

    Do I need new clamps with this upper hose?

    Yes. The hose clamps should be replaced each time a new coolant hose is installed. This listing holds one hose.

    What are the inside diameters of this upper radiator coolant hose?

    One end measures 41 mm (1.62 in) and the other 44 mm (1.75 in) inside, with a centerline length of 414 mm (16.3 in).

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review