Upper Radiator Coolant Hose for 1996 Buick LeSabre & More - Gates 21959

$25.99

Vehicles this part fits

    Part number: 21959
    UPC: 072053136265
    Condition: New
    Weight: 1.19 LBS
    Item Package Quantity: 1
    $25.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:21959
    Gates Radiator Coolant Hose P/N:21959
    $25.99
    $25.99

    Gates 21959 upper cooling system components for the 1996 Buick LeSabre 3.8L and other vehicles is a single molded coolant hose that carries coolant through the cooling system.

    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube, synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature range: -40°F to +257°F (-40°C to +125°C)

    Coolant seepage at the hose ends, cracks, or a hose that feels soft or swollen when the engine is cool can mean this part is worn, though a leaking water pump or a faulty radiator cap can be behind a coolant loss as well, so find the cause first. Only one goes in the upper hose position on the engine, and this listing is one hose.

    It is a direct-fit replacement for the 1995-1996 Buick Park Avenue 3.8L and the 1995-1996 Oldsmobile 88 3.8L. If your car is not named here, open the "Vehicles it fits" section and check your exact model and engine.

    Specifications

    Fit and size

    • Position: Upper
    • Quantity per vehicle: 1
    • Centerline length: 16.2 in (411 mm)
    • Inside diameter, both ends: 1.31 in (33 mm)

    Build and materials

    • Material: EPDM
    • Construction: Molded, without a spring
    • Country of origin: United States

    Installation notes

    • Gates recommends replacing hose clamps each time a new coolant hose is installed.
    • Do not use for fuel or oil transfer applications.

    Interchange: 14-2655-8 · KM-2892
    22270M · 61760 · 71580 · C71580 · D71779 · 10154057 · 22568674 · 25618609 · 946 · 8649

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    22270M, 14-2655-8, 21959, 61760, 71580, C71580, D71779, 10154057, 22568674, 25618609, 946, KM-2892, 8649

    Frequently Asked Questions

    Does the Gates 21959 fit the 1995-1996 Buick Park Avenue 3.8L?

    Yes, Gates 21959 is listed as an upper hose for the 1995-1996 Buick Park Avenue 3.8L, one per vehicle. For any other car, use the "Vehicles it fits" section to check the model and engine.

    What are the inside diameter and length of the Gates 21959 hose?

    Gates 21959 measures 1.31 in (33 mm) inside diameter at both ends. Its centerline length is 16.2 in (411 mm).

    Can I use this coolant hose for fuel or oil lines?

    No. Do not use this hose for fuel or oil transfer applications; it is a molded EPDM coolant hose.

    Do I need new clamps with this molded coolant hose?

    Gates recommends replacing hose clamps each time a new coolant hose is installed, so plan on fresh clamps for this hose.

    How can I check if my upper coolant hose is going bad?

    With the engine off and cool, look for cracks, coolant residue at the ends, or a hose that feels soft or swollen. If you see any of these, have the hose replaced promptly.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review