Upper Radiator Coolant Hose for 1998-2002 Honda Accord & More - Gates 22338

$27.99

Vehicles this part fits

    Part number: 22338
    UPC: 072053307160
    Condition: New
    Weight: 1.05 LBS
    Item Package Quantity: 1
    $27.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:22338
    Gates Radiator Coolant Hose P/N:22338
    $27.99
    $27.99

    Gates 22338 upper radiator coolant hose for the 1998-2002 Honda Accord 4-cylinder 2.3L and other vehicles carries coolant between the radiator and the engine. It is a molded hose, pre-shaped to fit and seal at both connections.

    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature range: -40 °F to +257 °F (-40 °C to +125 °C)

    Quick facts

    • Part: Gates 22338 radiator coolant hose
    • Fits: 1998-2002 Honda Accord 4-cylinder 2.3L and other vehicles
    • Position: Upper
    • Material: EPDM
    • Condition: New

    Coolant weeping at the hose ends, a soft or swollen hose, or cracks and chafing in the rubber can mean the hose is due for replacement. A loose clamp, a weak radiator cap or a leaking thermostat housing can show up the same way, so find the cause before you buy a hose. Inspect only with the engine off and cool.

    Fits

    It fits the 1998-2002 Honda Accord 4-cylinder 2.3L, the 1997 Acura CL 4-cylinder 2.2L and the 1998-1999 CL 4-cylinder 2.3L. Each engine takes one upper hose.

    Specifications

    Fit and size

    • Position: Upper
    • Quantity per vehicle: 1
    • Centerline length: 15.9 in (404 mm)
    • End 1 inside diameter: 1.19 in (30 mm)
    • End 2 inside diameter: 1.19 in (30 mm)

    Build and materials

    • Construction: Molded
    • Material: EPDM
    • Reinforcement: Synthetic fiber knit
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 22337M · 71967 · D71967 · 62384 · 19501P6WA00 · 19501P6WA01 · 19501PAAA00 · 8971

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    22337M, 22338, 71967, D71967, 62384, 19501P6WA00, 19501P6WA01, 19501PAAA00, 8971

    Frequently Asked Questions

    Is the Gates 22338 upper hose right for a 1998-2002 Honda Accord 4-cylinder 2.3L?

    Yes. Gates 22338 is an upper radiator coolant hose made for the 1998-2002 Honda Accord 4-cylinder 2.3L, and each engine takes one.

    What is the Gates molded coolant hose made of?

    Gates 22338 has an EPDM tube and an EPDM cover, with knit synthetic fiber reinforcement. The cover resists heat, ozone and chemical coolant.

    What temperature range does this Gates coolant hose handle?

    The range is -40 °F to +257 °F (-40 °C to +125 °C). Its materials also resist collapse under vacuum.

    Should I replace the clamps when fitting a Gates radiator coolant hose?

    Yes. Put new hose clamps on each time a new coolant hose is installed, rather than reusing the old ones.

    How can I tell if an upper radiator hose is worn out?

    With the engine off and cool, look for cracks, a swollen or soft section, or coolant residue at the ends. A shop can pressure-test the cooling system if you are unsure.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review