Keep coolant moving between the engine and radiator with the Gates Molded Coolant Hose 22350, a pre-shaped lower radiator hose that drops in on the 1998–2002 Ford Ranger and 1998–2002 Mazda B4000, both with the V6-4.0L engine. It's molded to the factory routing so it fits and seals without fighting a straight length of bulk hose.
Pre-shaped to fit and help ensure perfectly sealed connections. Caution: do not use for fuel or oil transfer applications. Gates recommends replacing hose clamps each time a new coolant hose is installed. Country of origin: United States.
Interchange: 24378L · 71957 · D71957 · F87A 8B273 BC · F87A8B273BC · F87Z 8286 BA · F87Z8286BA · XL2 48B273 BA · XL248B273BA · 62200 · 62346 · ZZP215185 · KM-4332 · KM4332 · 8983
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Gates 22350 fit?
It's cataloged as a lower coolant hose for the 1998–2002 Ford Ranger and 1998–2002 Mazda B4000, both with the V6-4.0L engine. Check the Buyer's Guide tab to confirm fitment for your vehicle.
What is the hose made of?
An EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover, using materials engineered to resist collapse under vacuum and electrochemical degradation.
What standards does it meet?
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances), and handles a temperature range of -40°F to +257°F (-40°C to +125°C).
Should I replace the hose clamps too?
Gates recommends replacing the hose clamps each time a new coolant hose is installed to help ensure properly sealed connections.
Can this hose be used for fuel or oil lines?
No. This is a coolant hose only — do not use it for fuel or oil transfer applications.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
