Gates Radiator Coolant Hose P/N:22537
Gates 22402 lower radiator coolant hose for the 1992-1997 Ford F-250 V8 5.8L and other vehicles carries engine coolant through the cooling system. This Gates radiator coolant hose is a molded modular assembly built with OEM-exact hose components.
A worn radiator coolant hose can show up as coolant seepage at the ends, cracks, swelling, or a soft spot that feels collapsed when you press it with the engine off and cool. Before you replace the hose, rule out a loose clamp or another source of coolant loss in the system, since overheating can have other causes.
The 1992-1997 Ford F-250 V8 5.8L, the 1992-1996 Ford F-150 V8 5.8L and the 1992-1993 Ford Bronco V8 5.8L each take one of these hoses, and other vehicles do too. If your vehicle isn't named here, find its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One radiator coolant hose with 2 branches and an outlet.
Interchange: F3TE 6K741 AB · F3TZ 6K741 A · 20381S · 67121 · A91969 · 9035
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Gates lower radiator hose 22402 right for the 1992-1996 Ford F-150 V8 5.8L?
Yes, Gates 22402 fits the 1992-1996 Ford F-150 V8 5.8L. For another vehicle, look up its year and engine in the "Vehicles it fits" section.
Does Gates 22402 have quick-connect fittings or branches?
This hose is a molded modular assembly with 2 branches and an outlet. It has no quick-connect fittings.
What is the Gates molded coolant hose 22402 made of?
Gates 22402 is made of EPDM and plastic. The tube is EPDM with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.
What temperature range does Gates 22402 handle?
This hose is rated from -40°F to +257°F (-40°C to +125°C). It meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 for 25 mm (1 in.) ID and over.
Do I need new clamps with a Gates coolant hose like 22402?
Yes, replace the clamps each time a new coolant hose is installed. Use this hose only for coolant, not for fuel or oil transfer.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.