Lower Radiator Coolant Hose for 2009-2012 Chevrolet Colorado & More - Gates 23437

$113.99

Vehicles this part fits

    Part number: 23437
    UPC: 770075364283
    Condition: New
    Weight: 9.24 LBS
    Item Package Quantity: 1
    $113.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:23437
    Gates Radiator Coolant Hose P/N:23437
    $113.99
    $113.99

    Gates 23437 lower radiator coolant hose for the 2009-2012 Chevrolet Colorado V8 5.3L and other vehicles carries coolant between the engine and the radiator. This Gates radiator coolant hose is molded from EPDM and pre-shaped to seal at its connections.

    • Specifically engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped molded form made to seal at the connections
    • EPDM tube, synthetic fiber knit reinforcement and an EPDM cover that resists heat, ozone and chemical coolant
    • Meets SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)

    Quick facts

    • Part: Gates 23437 radiator coolant hose
    • Fits: 2009-2012 Chevrolet Colorado V8 5.3L and other vehicles
    • Position: Lower
    • Material: EPDM
    • Condition: New

    A worn lower hose can show up as coolant drips at the ends, cracks, or a soft or swollen hose that may collapse under vacuum. Before you replace it, rule out a loose clamp or a leak at the radiator or water pump, since coolant loss and overheating have more than one source.

    Fits

    The vehicles it fits include the 2009-2012 Chevrolet Colorado V8 5.3L, the 2009-2012 GMC Canyon V8 5.3L and the 2008-2010 Hummer H3 V8 5.3L. The 2009-2012 Chevrolet Colorado V8 5.3L takes one hose. Driving something else? Look up your model and year in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: Lower
    • Quantity per vehicle: 1
    • Centerline length: 36.6 in (930 mm)
    • Inside diameter, both ends: 1.56 in (40 mm)

    Build and materials

    • Material: EPDM
    • Construction: molded, without an internal spring
    • Reinforcement: synthetic fiber knit
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 26625X · 66122 · E91362 · 19130350 · 25801961 · 25802007 · 16173

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    26625X, 23437, 66122, E91362, 19130350, 25801961, 25802007, 16173

    Frequently Asked Questions

    Does Gates 23437 fit the 2008-2010 Hummer H3 V8 5.3L?

    Yes. Gates 23437 is listed for the 2008-2010 Hummer H3 V8 5.3L, and it also fits the 2009-2012 GMC Canyon V8 5.3L.

    What temperature range does the Gates coolant hose 23437 handle?

    Gates 23437 is rated from -40 °F to +257 °F (-40 °C to +125 °C). Its EPDM cover resists heat, ozone and chemical coolant.

    Can the Gates molded coolant hose 23437 be used on a fuel or oil line?

    No. This hose is made for coolant and must not be used for fuel or oil transfer applications.

    What does a worn lower radiator coolant hose look like?

    With the engine off and cool, look for cracks, a soft or swollen hose, or coolant seepage at the ends. A shop can pressure-test the cooling system if the cause is unclear.

    Should I replace the clamps when installing this Gates lower radiator hose?

    Yes. Replace the hose clamps each time a new coolant hose goes on, rather than reusing the old ones.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review