Lower Radiator Coolant Hose for 2006-2009 Ford Fusion & More - Gates 23448

$167.99

Vehicles this part fits

    Part number: 23448
    UPC: 770075517993
    Condition: New
    Weight: 0.50 LBS
    Item Package Quantity: 1
    $167.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:23448
    Gates Radiator Coolant Hose P/N:23448
    $167.99
    $167.99

    Gates 23448 lower radiator coolant hose for the 2006-2009 Ford Fusion V6 3.0L and other vehicles carries engine coolant between the engine and the radiator. It is a molded hose that includes the outlet.

    • Gates Modular Coolant Hose line, built as a modular assembly
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 for 25 mm (1 in.) ID and over
    • Temperature range: -40 °F to +257 °F (-40 °C to +125 °C)

    Quick facts

    • Part: Gates 23448 radiator coolant hose
    • Fits: 2006-2009 Ford Fusion V6 3.0L and other vehicles
    • Position: Lower
    • Material: EPDM, plastic
    • Condition: New

    A coolant hose that is cracked, swollen or seeping at its ends can mean it is wearing out. Before you replace it, rule out a leaking radiator, a loose clamp or a failing water pump, since those parts can also leak coolant or run hot.

    Fits

    It fits the 2006-2009 Ford Fusion V6 3.0L, the 2006-2009 Mercury Milan V6 3.0L and the 2006 Lincoln Zephyr V6 3.0L.

    Specifications

    Fit and size

    • Position: Lower
    • Quantity per vehicle: 1
    • Centerline length: 1107 mm (43.6 in)
    • End 1 inside diameter: 38 mm (1.5 in)
    • End 2 inside diameter: 38 mm (1.5 in)
    • Branches: 0; quick-connect fittings: 0

    Build and materials

    • Construction: molded, modular, with an outlet
    • Material: EPDM, plastic
    • Condition: New
    • Country of origin: United States

    In the box

    One radiator coolant hose with its outlet. This listing holds one hose, and a vehicle needs one.

    Installation notes

    • Replace the clamps each time a new coolant hose is installed.
    • For coolant only; not for fuel or oil transfer.

    Interchange: 6E5Z 8286 BA
    26632X · 66137 · 72389 · E72389 · E72699 · 16184

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    26632X, 23448, 66137, 72389, E72389, E72699, 6E5Z 8286 BA, 16184

    Frequently Asked Questions

    Does the Gates 23448 radiator coolant hose fit a 2006-2009 Ford Fusion V6 3.0L?

    Yes. The Gates 23448 lower radiator coolant hose fits the 2006-2009 Ford Fusion V6 3.0L, and that vehicle takes one hose.

    Is the Gates lower radiator hose right for the 2006 Lincoln Zephyr V6 3.0L?

    Yes. This lower radiator coolant hose fits the 2006 Lincoln Zephyr V6 3.0L, and that vehicle takes one.

    Does this Gates coolant hose include the outlet?

    Yes, Gates 23448 includes an outlet as its modular component, with no hose branches or quick-connect fittings; this listing is one hose.

    Is the Gates molded coolant hose made of EPDM?

    Yes, this radiator coolant hose has an EPDM tube with synthetic fiber knit reinforcement and an EPDM cover resistant to heat, ozone and chemical coolant; its listed materials are EPDM and plastic.

    Should I replace the clamps when I install a Gates radiator coolant hose?

    Yes, put in new clamps each time a new coolant hose goes on; this hose is for coolant only, never for fuel or oil transfer.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review