Upper Radiator Coolant Hose for 2014-2017 Chevrolet Equinox & More - Gates 24341

$55.99

Vehicles this part fits

    Part number: 24341
    UPC: 770075638377
    Condition: New
    Weight: 0.69 LBS
    Item Package Quantity: 1
    $55.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:24341
    Gates Radiator Coolant Hose P/N:24341
    $55.99
    $55.99

    Keep coolant moving between the engine and radiator with the Gates ThermalPro Premium Molded Coolant Hose (MPN 24341). It's a direct-fit replacement for the 2014-2017 Chevrolet Equinox and 2014-2017 GMC Terrain with the L4-2.4L engine, pre-shaped to route into place and help ensure a properly sealed connection.

    • EPDM construction: EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone- and chemical-coolant-resistant EPDM cover.
    • Collapse resistant: specifically-engineered materials resist collapse under vacuum.
    • Degradation resistant: engineered to resist electrochemical degradation, cited as the leading cause of hose failure.
    • Meets standards: built to the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances); rated for a temperature range of -40°F to +257°F (-40°C to +125°C).

    Cracked, swollen, or leaking coolant hoses can let coolant escape; if a failed hose is the cause, this molded hose replaces it. Gates recommends replacing hose clamps each time a new coolant hose is installed. Do not use for fuel or oil transfer applications.

    Manufacturer part number 24341. Country of origin: United States.

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    22836M, 70897, F11462, 23153553, 17007

    Frequently Asked Questions

    What vehicles does this hose fit?

    It's a direct-fit replacement for the 2014-2017 Chevrolet Equinox and 2014-2017 GMC Terrain equipped with the L4-2.4L engine. See the "Vehicles it fits" section to confirm your vehicle.

    What is this coolant hose made of?

    It uses an EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical-coolant-resistant EPDM cover.

    Should I replace the hose clamps when installing it?

    Yes. Gates recommends replacing the hose clamps each time a new coolant hose is installed.

    Can I use this hose for fuel or oil lines?

    No. This is a coolant hose and should not be used for fuel or oil transfer applications.

    What temperature range is this hose rated for?

    It's rated for a temperature range of -40°F to +257°F (-40°C to +125°C) and meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances).

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review