Gates Radiator Coolant Hose P/N:24345

Be the first to review this product

$32.99

MPN: 24345

UPC: 770075637561

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates Radiator Coolant Hose P/N:24345

$32.99

Description

Keep coolant moving cleanly through the top of your cooling system with the Gates Molded Coolant Hose 24345, a pre-shaped upper radiator hose that drops in for the 2012-2019 Nissan Versa, 2012-2018 Nissan March, 2013-2017 Nissan Tiida, 2014-2019 Nissan Note, 2014-2019 Nissan Versa Note, and the 2015 and 2019 Nissan Micra — all with the L4-1.6L engine. It carries coolant on the upper radiator-to-filler-neck / filler-neck-to-engine run, so its molded curves match the factory routing without trimming or reshaping.

Molded to fit: pre-shaped to seat in the original path and seal at both connections.
EPDM construction: EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone- and chemical coolant-resistant EPDM cover.
Collapse-resistant: specifically-engineered materials resist collapse under vacuum and help resist electrochemical degradation, a leading cause of hose failure.
Rated: meets the requirements of SAE 20R4 class D2 and DIN 73411 class A (except tolerances); temperature range -40°F to +257°F (-40°C to +125°C).

End 1 inside diameter is 1 in (25 mm) and End 2 is 1.31 in (33 mm), with a 10.61 in (269 mm) centerline length. Gates recommends replacing hose clamps whenever a new coolant hose is installed. Do not use for fuel or oil transfer. Made in the United States.

Interchange: 20704S · 67167 · E90166 · 215013HC3A · 72823 · B72823 · 17011

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

20704S, 67167, E90166, 215013HC3A, 72823, B72823, 17011

Frequently Asked Questions

What vehicles does the Gates 24345 hose fit?

It fits the 2012-2019 Nissan Versa, 2012-2018 March, 2013-2017 Tiida, 2014-2019 Note, 2014-2019 Versa Note, and the 2015 and 2019 Micra, all with the L4-1.6L engine.

Where does this hose install?

It is an upper radiator hose, cataloged for the radiator-to-filler-neck and filler-neck-to-engine positions. Its molded shape matches that factory routing.

What is the hose made of?

It uses an EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone- and chemical coolant-resistant EPDM cover, and it meets SAE 20R4 class D2 and DIN 73411 class A requirements.

Can I reuse my old hose clamps?

Gates recommends replacing the hose clamps each time a new coolant hose is installed. Clamps are not included with this hose.

Can this hose be used for fuel or oil lines?

No. This is a coolant hose only; do not use it for fuel or oil transfer applications. Its rated temperature range is -40°F to +257°F.