Gates 24489 lower radiator coolant hose for the 2013-2016 Ford F-350 V8 6.2L and other vehicles carries engine coolant through a molded, modular hose. This Gates radiator coolant hose is the lower hose at the oil cooler adapter, with its branches and quick connector already built in.
- Gates Modular Coolant Hose line: molded assembly with branches, outlets and quick connector built in
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 at 25 mm (1 in.) ID and over
- Temperature range: -40 °F to +257 °F (-40 °C to +125 °C)
Quick facts
- Part: Gates 24489 radiator coolant hose
- Fits: 2013-2016 Ford F-350 V8 6.2L and other vehicles
- Position: Lower - oil cooler adapter
- Material: EPDM, plastic, steel
- Condition: New
A failing coolant hose can show up as coolant drips, a soft, swollen or cracked hose, or a temperature gauge that climbs. Those signs can have other causes, so work out where the problem starts before you replace the hose. With the engine off and cool, look over the hose and quick connector for cracks, wet spots or swelling.
Fits
It fits the 2013-2016 Ford F-350 V8 6.2L, the 2011-2016 Ford F-250 Super Duty V8 6.2L and the 2011-2016 Ford F-350 Super Duty V8 6.2L. Each takes one hose.
Specifications
Fit and size
- Position: lower, oil cooler adapter
- Quantity per vehicle: 1
- Centerline length: 21.375 in (543 mm)
- End 1 and End 2 inside diameter: 0.73 in (19 mm) each
- End 3 inside diameter: 1.5 in
- End 4 inside diameter: 1.85 in (47 mm)
- Modular components: 2 branches, 2 outlets, male quick connector
Build and materials
- Material: EPDM, plastic, steel
- Construction: molded, no internal spring
- Condition: New
- Country of origin: Mexico
In the box
One radiator coolant hose with 2 branches, 2 outlets and a male quick connector.
Installation notes
- Replace the clamps each time a new coolant hose is installed.
- Not for fuel or oil transfer applications.
Interchange: BC34 8B273 AA · BC34 8B273 AB · BC34 8B273 AC · BC3Z 8286 F · BC3Z 8286 L · KM 5047 · KM 5110
27218X · F10279 · 17137
This part cross-references / interchanges with the following part numbers:
27218X, F10279, BC34 8B273 AA, BC34 8B273 AB, BC34 8B273 AC, BC3Z 8286 F, BC3Z 8286 L, KM 5047, KM 5110, 17137
Frequently Asked Questions
Does Gates 24489 fit the 2011-2016 Ford F-250 Super Duty V8 6.2L?
Yes. Gates 24489 fits the 2011-2016 Ford F-250 Super Duty V8 6.2L, and that truck takes one hose.
What is this Gates coolant hose made of?
The listed material is EPDM, plastic and steel. The tube is EPDM with synthetic fiber knit reinforcement, under a heat-, ozone- and chemical coolant-resistant EPDM cover.
Does this Gates lower radiator hose come with the branches and quick connector?
Yes. The Gates 24489 hose comes with 2 branches, 2 outlets and a male quick connector as part of the modular assembly.
What are the end sizes on the Gates molded coolant hose?
Ends 1 and 2 have a 0.73 in (19 mm) inside diameter. End 3 is 1.5 in and End 4 is 1.85 in (47 mm); the centerline length is 21.375 in (543 mm).
Should I put on new clamps with this Gates 24489 hose?
Yes. Replace the clamps each time a new coolant hose is installed, including with Gates 24489.
