Gates 24610 lower cooling system components for the 2010-2013 Mazda 3 2.3L / 2.5L and other vehicles come as a molded, modular coolant hose with the branch already built in.
A coolant leak, a collapsed hose or cracks in the cover can mean this part is worn. Look it over by eye only when the engine is cool. These signs alone do not prove this part is the problem; a loose clamp, for one, can leak coolant too.
It fits the 2010-2013 Mazda 3 with the L4-2.3L or L4-2.5L engine, and the 2010-2013 Mazda 3 Sport with the L4-2.5L. Each takes one.
Fit and size
Build and materials
Interchange: 27256X · 66491 · E91531 · L3CE1518Y · 17262 · R40011
This part cross-references / interchanges with the following part numbers:
Does the Gates 24610 fit the 2010-2013 Mazda 3 Sport 2.5L?
Yes. Gates 24610 fits the 2010-2013 Mazda 3 Sport with the L4-2.5L engine, and also the 2010-2013 Mazda 3 with the L4-2.3L or L4-2.5L engine.
What are the end sizes on the Gates 24610 lower hose?
Gates 24610 has a 1.25 in (32 mm) inside diameter at ends 1 and 2, and .82 in at end 3. Its centerline length is 25.25 in (641 mm).
What is this modular coolant hose made of?
The material is EPDM and plastic. The tube is EPDM with synthetic fiber knit reinforcement, and the cover is heat-, ozone- and chemical coolant-resistant EPDM.
Do I need new clamps with this lower cooling hose?
Yes. Replace the clamps each time this part is installed. It is not for fuel or oil transfer applications.
Does the Gates 24610 have quick-connect fittings or a branch?
Gates 24610 has one branch and no quick-connect fittings. It is a molded part and contains no spring.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
