Gates Radiator Coolant Hose P/N:22292
Gates 24653 upper radiator coolant hose for the 2008-2010 Volkswagen Jetta 4-cylinder 2.0L and other vehicles carries engine coolant through a ready-assembled modular hose. This Gates radiator coolant hose is molded and built with OEM-exact hose components, so the branches and quick connectors come already in place.
Coolant leaks, cracks, soft or swollen spots on the hose, or overheating can point to a failing hose, but a leak or overheating can also start elsewhere in the cooling system. Find the cause first: with the engine off and cool, look over the hose, its branches and the quick connectors for cracks, wet spots or dried coolant residue.
This hose is listed for a wide range of Volkswagen and Audi models, including the 2009-2015 Volkswagen Eos 4-cylinder 2.0L and the 2009-2014 Volkswagen GTI 4-cylinder 2.0L. Open the "Vehicles it fits" section to check your exact model and engine. There is one upper hose per vehicle.
Fit and size
Build and materials
One radiator coolant hose with 2 branches, 2 female quick connectors and a check valve.
Interchange: 27267X · 73061 · E73061 · F10460 · 17303 · R25575 · CHR0518 · 1K0122096J · 1K0122101HC · 1K0122101HQ · 1K0122101JL · 1K0122101JP · 1K0122101LA
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Gates coolant hose a fit for the 2008-2010 Volkswagen Jetta 4-cylinder 2.0L?
Yes. Gates 24653 is listed for the 2008-2010 Volkswagen Jetta 4-cylinder 2.0L and for other vehicles. Open the "Vehicles it fits" section to check your exact model and engine.
What parts come with this Gates molded coolant hose?
Gates 24653 includes 2 branches, 2 female quick connectors and a check valve as part of the modular hose.
What is this upper hose made of, and what temperatures can it handle?
The material is EPDM, plastic and steel, with a synthetic fiber knit reinforcement. The temperature range is -40°F to +257°F (-40°C to +125°C).
What are the inside diameters and length of this upper hose?
The four ends measure 8 mm (0.3 in), 15 mm (0.61 in), 1.56 in and 46 mm (1.8 in) inside diameter. The centerline length is 25 in (635 mm).
Should I replace the clamps when I install the Gates 24653 hose?
Yes. New clamps go on with each new coolant hose you fit. This hose is for coolant only, never for fuel or oil transfer.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.