Gates 51810 upper radiator coolant hose for the 2017-2024 Ford F-250 Super Duty V8 6.7L and other vehicles carries coolant between the engine and the radiator. This Gates radiator coolant hose is molded and modular, with two female quick connectors already fitted.
- Modular assembly with two female quick connectors already fitted
- Materials engineered to resist collapse under vacuum
- Resists electrochemical degradation, the leading cause of hose failure
- EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 for 25 mm (1 in.) ID and over
- Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)
Quick facts
- Part: Gates 51810 radiator coolant hose
- Fits: 2017-2024 Ford F-250 Super Duty V8 6.7L and other vehicles
- Position: Upper
- Material: EPDM, plastic, steel
- Condition: New
Coolant seeping at the hose, a cracked, swollen or collapsed hose, or an engine that runs hot can mean this hose is worn, though a failing thermostat or a worn radiator cap can be behind the overheating too. With the engine cool, you can look the hose over for cracks, bulges and wet spots.
Fits
The vehicles it fits include the 2017-2024 Ford F-350 Super Duty V8 6.7L and the 2017-2024 Ford F-450 Super Duty V8 6.7L, besides the first truck named above.
Specifications
Fit and size
- Position: upper
- Quantity per vehicle: 1
- Centerline length: 23.6 in (599 mm)
- Inside diameter, both ends: 1.97 in (50 mm)
- Quick-connect fittings: 2
- Branches: 0
Build and materials
- Material: EPDM, plastic, steel
- Construction: molded, modular
- Modular components included: 2 female quick connectors
- Contains spring: No
- Condition: New
- Country of origin: United States
In the box
One hose with its two female quick connectors. This listing holds one hose, and the vehicle takes one.
Installation notes
- Replace the clamps each time a new coolant hose is installed.
- Use it for coolant only, never for fuel or oil transfer.
Interchange: 626-845
HC34 8B274 CB · HC3Z 8260 C · 27477X · 74333 · F11302 · KM5475
This part cross-references / interchanges with the following part numbers:
27477X, 74333, 626-845, F11302, HC34 8B274 CB, HC3Z 8260 C, KM5475, 51810
Frequently Asked Questions
Does Gates 51810 fit the 2017-2024 Ford F-250 Super Duty V8 6.7L?
Yes, Gates 51810 is an upper hose for the 2017-2024 Ford F-250 Super Duty V8 6.7L and the 2017-2024 Ford F-350 Super Duty V8 6.7L. For another truck, look it up in the "Vehicles it fits" section.
Which quick connectors come with the Gates 51810 hose?
Two female quick connectors come on the hose. This listing is one hose, and the application takes one.
What is this Gates molded coolant hose made of?
Gates 51810 is made of EPDM, plastic and steel. The tube is EPDM with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.
What temperature range can this Gates coolant hose handle?
It is rated from -40 °F to +257 °F (-40 °C to +125 °C). It meets SAE 20R3 EC Class D1 under 25 mm ID and SAE 20R4 EC Class D1 for 25 mm ID and over.
Should I replace the clamps when installing the Gates 51810 hose?
Yes, Gates recommends replacing the clamps each time a new coolant hose is installed. This hose is for coolant only, not for fuel or oil transfer.
